Abstract:Dual-beam optical trap is constituted by two beams of unfocused counter-propagating laser. It has advantages such as several equilibrium points, small optical power density, large capture range and easier integration with other technologies, which optical tweezers may not achieve. Dual-beam optical trap stiffness is an important parameter to describe its mechanical properties. On the basis of quartz-substrate dual-beam optical fibre trap unit, we demonstrate a simple method for measuring stiffness. Residual gravity offset by buoyancy may provide a tiny force for the optical trap. By measuring the relations between the captured particle's axial equilibrium position and residual gravity, we may calibrate the optical trap stiffness. This method simply requires measuring the relative position of the particle in the steady state of the optical trap, and dynamic measurement of the particle's location is not needed, so we can get a high position accuracy by long time measuring, thus the accuracy of the stiffness' calibration is improved. In this paper, we simulated and carried out experiments to measure the stiffness of a dual-beam fibre optical trap unit based on a quartz-substrate. We simulate the stiffness of several Mie particles with different materials and sizes in dual-beam optical trap as well as the relation between the waist radius of fundamental mode Gaussian beam and stiffness. Stiffness measurement experiment is conducted using the residual gravity method. Stiffness values measured in experiments are consistent with the simulation results, which verify the validity and accuracy of the method.

Measurement of optical trapping force and stiffness of micro-particles with the dragforce method

Simulation for the trapping force on Mie micro-particles in optical tweezers

Simulation Of Forces On Mie Micro-Particles In Laser Trap

Quantitative measurements of force and displacement using an optical trap

Optical trapping of two different microparticles by a double-tapered fiber probe

Experimental measurement and analysis of the optical trapping force acting on a yeast cell with a lensed optical fiber probe

Analysis of Transverse and Longitudinal Optical Trap Stiffness and Its Application in A Novel Measurement Method of Micro-Particle Refractive Index

Information Entropy Method for Measuring the Axial Displacement of A Bead and Its Application to Analyzing the Trapping Force of Optical Trap

Experimental Measurement of the Trapping Force Acting on a Yeast Cell with a Lensed Optical Fiber Probe

Calibration of Optical Tweezers Using Time of Flight Method

A Contactless Methodology of Picking Up Micro-Particles from Rigid Surfaces by Acoustic Radiation Force

Manipulation of yeast cells by a tapered fiber probe and measurement of optical trapping force

Quantitative Study of Conservative Gradient Force and Non-Conservative Scattering Force Exerted on a Spherical Particle in Optical Tweezers

Measurement for Optical Trap Force on Cells Based on Electrokinetic Phenomena

Direct measurement of thermophoretic and photophoretic force acting on hot micromotors with optical tweezers

Extending calibration-free force measurements to optically-trapped rod-shaped samples

Simulation and Measurement of Stiffness for Dual Beam Laser Trap Using Residual Gravity Method

Fdtd Numerical Simulation of the Trapping Force of Microsphere in Single Optical Tweezers

Direct measurement of optical trapping force gradient on polystyrene microspheres using a carbon nanotube mechanical resonator

Effect of the Optical Field Eradiating Force of Laser Micro-beam to Microscopic Particles

Comparison Investigation of the Three-dimensional Stiffness of Optical Tweezers with Different Polarization Fields