Abstract:To address the limitations in actuator selection within strong magnetic environments, this study introduces a novel inertial piezoelectric actuator with asynchronous dual-foot motion, which meets the need for high-precision actuation in strong magnetic field environments. The design principle is to use two driving feet that generate elliptical motion in an alternating method to achieve continuous linear motion of the actuator. This approach enhances load capacity, speed, and stepping characteristics. The design allows for better control of backward motion without modifying the driving waveform, thus improving the actuator's speed and ensuring consistent performance in both directions. A finite element model of the proposed actuator stator is developed and analyzed using commercial software to optimize its dimensional parameters. A prototype is fabricated, and experimental investigations are carried out. The results indicate that the dual asynchronous driving method significantly increases the speed of the actuator and the consistency of the motion by improving stepping characteristics. The prototype reached a maximum speed of 8.98 mm/s, supported a maximum load of 4.5 N, and achieved a displacement resolution of 19 nm. Finally, the strong magnetic field environmental test and MRI image quality test were conducted, and experimental results confirmed that the actuator has superior magnetic compatibility, highlighting its potential for precision applications in challenging environments. This research proposes new methods to enhance the retraction characteristics and output performance of inertial actuators, with their excellent magnetic field compatibility anticipated to be applied in future MRI-compatible injectors, puncture devices, or other actuating mechanisms.

Novel High-Speed Electromagnetic Actuator with Permanent-Magnet Shielding for High-Pressure Applications

Modeling, Design and Control of High-Speed Powerful Solenoid Based on Giant Magnetostrictive Material

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

A Novel Design for an Electromagnetic Valve Actuator for High Pressure Applications

Thrust Force of Novel PM Transverse Flux Linear Oscillating Actuators with Moving Magnet

Closed-Double-Magnetic Circuit for A Long-Stroke Horizontal Electromagnetic Vibration Exciter

Study of high-pressure high-speed on-off solenoid using permanent magnet shield

Novel high-response electromagnetic actuator for electronic engraving system

A Micro Electromagnetic Actuator with High Force Density

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

High-Response Electromagnetic Actuator with Twisting Axis for Gravure Systems

A Novel Halbach-Type Transverse Flux Linear Oscillatory Actuator

Novel Bidirectional Linear Actuator for Electrohydraulic Valves

Design and Performance Investigation of Novel Linear Switched Flux PM Machines

Performance Investigation of Odd Primary Pole Linear Switched-Flux Pm Machine with Mechanical Flux Adjuster

Dynamic Model of Giant Magnetostrictive Actuator Considering Excess Eddy Current Loss

An asynchronous dual-foot inertial piezoelectric actuator with strong magnetic compatibility

Electromagnetic Performance Analysis of Novel Flux-Regulatable Permanent Magnet Machines for Wide Constant-Power Speed Range Operation

Low Power Linear Actuator for Direct Drive Electrohydraulic Valves

Novel pressure-resistant oil-immersed proportional actuator for electrohydraulic proportional control valve

Research on the New Type Permanent Magnetic Actuator (PMA) Intelligent AC Contactor