Abstract:Anaerobic ammonium oxidation (Anammox) was a recent discovery of new energy-efficient, microbiologically mediated nitrogen removal process, which was mainly used for the treatment of rich ammonium wastewater of low C/N ratio in a high operating temperature of 35–40 °C. But the growth rate of anammox bacteria was extremely low and it was easily inhibited by many factors, which becomes a bottleneck problem in the application of this efficient nitrogen removal process in the actual wastewater treatment at ambient temperature. So, influence of several key factors (i.e., COD, methanol, hydrazine, hydroxylamine, pH, nitrate, and phosphate) on the nitrogen removal performance of the anammox process was researched to optimize the operation of the anammox process in a bio-filter, and the total nitrogen removal rate (RTN) and the linear correlation coefficient between the total nitrogen removal rate (RTN) and influent total nitrogen load (LTN) of it were assessed with the real municipal wastewater at ambient temperature. The results demonstrated that (1) the influent of COD <100 mg/L had no visible inhibition on the anammox process in the bio-filter, and the recommendation of COD <80 mg/L was suitable for the operation; (2) short-term shock load of methanol would give significant inhibition on the anammox bacteria, which could be restored by adding a small amount of hydrazine and hydroxylamine, but the recovery process was extremely slow; (3) when the influent total nitrogen load increased suddenly, and the removal capacity of the bio-filter was not enough, the temporary mixed dosing of hydroxylamine and hydrazine could enhance the nitrogen removal performance; (4) the anammox activity was very sensitive to the influent pH, and the best range of pH values was 7.3–7.6; (5) the nitrate of 23.56–463.14 mg N/L had no obvious effect on the nitrogen removal performance; and (6) the phosphate itself had no significant inhibition on the anammox bacteria physiologically and ecologically, but it could form a great deal of deposits, which would lead to the bio-filter plugging.

Nitrogen Removal Potential and Biofilm Characteristics in the Anaerobic Ammonium Oxidation ('ANAMMOX') Biofilter Reactor

Anammox Transited from Denitrification in Upflow Biofilm Reactor.

Nitrogen Removal and Functional Bacteria Distribution of Anammox at Ambient Temperature

Performance of ANAMMOX process with different operation strategies based on substrate concentration

Effect of Organic Matter on Performance of ANAMMOX Reactor

Improving Nitrogen Removal in an ANAMMOX Reactor Using a Permeable Reactive Biobarrier.

[Performance of ANAMMOX Attached Microbial Film Expanded Bed Reactor].

Nitrogen Removal Efficiency and Microbial Community Analysis of ANAMMOX Biofilter at Ambient Temperature.

Kinetic Characteristics and Microbial Community of Anammox-EGSB Reactor

Start-up and Nitrogen Removal Performance of Anaerobic Ammonium Oxidation Bio-filter

Nitrogen Removal Efficiency of ANAMMOX Biofilter at Low Substrate Concentration

Performance of ANAMMOX-EGSB Reactor

Study on performance of ANAMMOX reactor and the functional bacteria at room temperature

Several key factors influencing nitrogen removal performance of anammox process in a bio-filter at ambient temperature

Influence of Nitrite Nitrogen Concentration on ANAMMOX Process

Start-up of ANAMMOX Bioreactor by Nitrifying Biofilm

Evaluations of Biofilm Thickness and Dissolved Oxygen on Single Stage Anammox Process in an Up-Flow Biological Aerated Filter

Influence of volumetric loading on nitrogen removal of ANAMMOX filtration and its matrix dynamics

Impacts of Different Morphologies of Anammox Bacteria on Nitrogen Removal Performance of a Hybrid Bioreactor: Suspended Sludge, Biofilm and Gel Beads.

Nitrogen Removal from Municipal Wastewater with Anammox in Bio-Film and Granular Reactors

Mathematical simulations of nitrogen removal via a partial nitrification-anaerobic ammonium oxidation in a membrane-aerated biofilm reactor