A simulative biomechanical experiment on different position of acetabular components influencing the load distribution around femoral head
ZHANG Zhi-ji,FU Ming,KANG Yan,CHEN Yi,YANG Zi-Bo,LIN Zi-hong,DUAN Xin,BAI Bo,LIAO Wei-ming,YU Nan-sheng
DOI: https://doi.org/10.3969/j.issn.1674-134X.2008.06.011
2008-01-01
Abstract:Objective To investigate the biomechanical effect of acetabular prosthesis position on artificial femoral head after total hip arthroplasty.Methods In the present study, sixteen total hip arthroplasty model of the human cadaver specimens were reconstructed, and then, under different acetabular component position (Two acetabular prosthesis were in anatomical position. Seven acetabular prosthesis inward displacement range from 2 mm to 14 mm, and Seven acetabular prosthesis upward displacement range from 2 mm to 14 mm), the load distribution around the femoral head was evaluated by the strain gages under 1000N axial loading. Results In inward group, the load distribution was higher in more 2 mm positioning hip in the same specimens, especially after the ingression distance were moved more than 6 mm, and the load distribution also had an increasing trend obviously. In upward group, the same result was found. But an increasing trend obviously happened at 8 mm upward displacement, and the load distribution also had an increasing trend obviously, except the upward displacement range from 4 mm to 6 mm. In the same moving distance, the stress of inward displacement was obviously higher than upward displacement.Conclusions In all groups, the load distribution around the femoral head was increased gradually. While the distance of inward displacement and superior displacement was increased, the more distant,more serious stress. The stress of 6 mm upward position was lower than that of nearby position, maybe it was a stress buffering site.