Abstract:The proposed CV‐type WPT system based on CLC‐N compensation eliminates bulky filter inductors and secondary side components, achieving a compact and lightweight design. Its ability to achieve approximate ZPA and ZVS operations, as well as CVO characteristics without complex closed‐loop control, highlights its simple structure and excellent functional performance. The demand for wireless power transfer (WPT) systems that can maintain a constant voltage (CV) output characteristic is gradually increasing in some practical application areas of WPT, such as industrial power supplies. However, existing CV‐type systems are often limited by the parameter design of the loosely coupled transformer (LCT), and the configuration of the receiver side is not compact enough. Therefore, this paper proposes a strongly coupled system with a CV output function composed of capacitor‐inductor‐capacitor‐none (CLC‐N) topology. The system's transmitter uses a CLC compensation, while the receiver conforms to a minimalist design without the need for compensation components such as capacitors and inductors. The initial segment of the paper pertains to the discussion of the conditions required to satisfy both the zero‐phase‐angle (ZPA) and CV output functionality of the suggested system. Subsequently, an in‐depth approach to parameter design is outlined, accentuating that the output voltage remains unrestricted by the LCT's parameters. Additionally, this paper examines the realization of zero‐voltage switching (ZVS) within the suggested system as well as the influence that variations in compensation components have on the CV output function. To underscore the benefits of the suggested CV‐type WPT system that employs CLC‐N compensation, the paper presents a comparison with a range of other CV‐type WPT systems. Ultimately, an experimental prototype is fabricated to test the theoretical framework, and the results from these experiments confirm the feasibility of the suggested CV‐type WPT system based on CLC‐N compensation.

Analysis and Design of a Wireless Closed-Loop ICPT System Working at ZVS Mode

Steady-State Analysis of the Inductively Coupled Power Transfer System

A Method of Resonant Frequency Optimized Selection for a SP Inductive Coupled Power Transfer System

Modeling a current source push-pull resonant converter for loosely coupled power transfer systems

Dynamic Analysis of a Current Source Inductively Coupled Power Transfer System

Design Considerations of Compensation Topologies in ICPT System

Investigation on Different Compensation Topologies in Inductively Coupled Power Transfer System

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

LCL Resonant Inductively Coupled Power Transfer Systems

Design of the resonant converter for the contactless inductive charging system

Analysis and Design of Single-Ended Resonant Converter for Wireless Power Transfer Systems

A Control Strategy for Efficiency Optimization and Wide ZVS Operation Range in Bidirectional Inductive Power Transfer System

Modeling and advanced control of wireless power transfer system with Z-source inverter

Analysis of Minimum Power Loss in Series-Series Compensated Wireless Power Transfer System under ZVS Conditions

Analysis and design of a high‐efficiency three‐coil WPT system with constant current output

Study of a Magnetic Coupling Resonant Wireless Power Transfer System

An LC/S Compensation Topology and Coil Design Technique for Wireless Power Transfer

A Multi-Inverter High-Power Wireless Power Transfer System with Wide ZVS Operation Range

A CV‐type WPT system based on CLC‐N compensation with compact receiver

An Optimal Variable Frequency Phase Shift Control Strategy for ZVS Operation Within Wide Power Range in IPT Systems

Analysis of ICPT System with LCC Resonant Topology Based on the Switch-Controlled Capacitor