Abstract:Structural vibration has always been a major concern in the engineering field. A dynamic vibration absorber in the form of contacts with adjustable stiffness (CDVA) offers effective vibration suppression and can improve conventional dynamic vibration absorbers with high sensitivity to frequency deviation and difficulty in adjusting the frequency. In this research, first, based on the theoretical model of the contact between a rubber ball and an inner cone, the feasibility of changing the axial contact state to change the structure's natural frequency was verified using an ANSYS simulation. A theoretical model of the static contact stiffness between the ball and the inner cone was constructed using Hertzian contact theory and Hooke's law, and a theoretical model of the cubic nonlinear elastic restoring force was used to characterize the stiffness properties of the rubber ball during compressive rebound. The steady-state frequency response equations of the main vibration structure were derived using the averaging method in conjunction with the two-degree-of-freedom dynamics model, and the stability of the solutions to the frequency response equations was obtained in conjunction with the stability determination criterion. Then, the impact of the CDVA's design parameters on the nonlinear dynamic response of the primary vibration structure was simulated and analyzed. The resulting findings can serve as guidance for designing dynamic vibration absorber parameters. Based on the principles of ball-inner cone contact, a dynamic vibration absorber structure was proposed. A design test was conducted to verify the correctness of the contact stiffness model, and an experimental study was carried out to investigate the law of change in the dynamic stiffness and damping of the principle structure of CDVA under dynamic excitation conditions. Finally, the vibration test platform of the solidly supported beam structure was constructed, and vibration suppression tests of the CDVA in different compression states were conducted to investigate the tunability and feasibility of CDVA vibration suppression. The results showed that the dynamic vibration absorber had good vibration absorption characteristics and could be used for single-mode vibration suppression of multimodal main structures.

Vibration suppression using targeted energy transfer in a two-degree-of-freedom unequal mass nonlinear vibration absorber

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Suppressing Random Response of a Regular Structure by an Inerter-Based Dynamic Vibration Absorber

Research on Vibration Suppression of Spacecraft Flexible Appendage Based on Nonlinear Energy Sink

Analysis of vibration suppression of master structure in nonlinear systems using nonlinear delayed absorber

Minimization of the Beam Response Using Inerter-Based Passive Vibration Control Configurations

Multimodal Vibration Suppression of Nonlinear Euler–Bernoulli Beam by Multiple Time-Delayed Vibration Absorbers

Vibration Control of Nonlinear Absorber–Isolator-Combined Structure with Time-Delayed Coupling

Studies on the damping mechanism of shape memory alloy-spring tuned vibration absorber attached to a multi-degree-of-freedom structure

Nonlinear Interactions of an N-Layer X-shape Low-Frequency Vibration Isolator Equipped with a Nonlinear Vibration Absorber at 1:1 Internal Resonance: Analytical and Numerical Investigations

Vibration suppression of an elastic beam with boundary inerter-enhanced nonlinear energy sinks

Vibration Attenuation Using A Nonlinear Dynamic Vibration Absorber With Negative Stiffness

Design and Experiment of Nonlinear Absorber for Equal-Peak and De-Nonlinearity

Virtual Dynamic Vibration Absorber Trap Fusion Active Vibration Suppression Algorithm Based on Inertial Actuators for Large Flexible Space Trusses

Design and validation of a nonlinear vibration absorber to attenuate torsional oscillations of propulsion systems

A Ball-Contacting Dynamic Vibration Absorber with Adjustable Stiffness and Nonlinear Characteristics

Dynamic stability and efficiency of centrifugal double pendulum vibration absorbers

Vibration suppression analysis for a tall structure attached with a nonlinear energy sink absorber

Study of Adaptive Tuned Vibration Absorber and Its Dynamic Properties

Optimizations of distributed dynamic vibration absorbers for suppressing vibrations in plates

Experiment Research and Nonlinear Analysis to Visco-Elastic Damping Structure for Whole-Spacecraft Passive Vibration Isolation System