Abstract:BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT.ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT.Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals.ResultsConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. Optical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. The objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Five teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Results ConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. Our ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries.

Detecting Early Artificial Caries by Using Optical Coherence Tomography

Research progress on early caries detection with optical coherence tomography

Detection of Early Dental Caries Based on Optical Methods

Diagnosis of dental caries based on attenuation coefficients analysis of optical coherence tomography images

Analysis of Changes in Optical Parameters in Methods to Detect Dental Caries Based on the Principle of QLF

Early stage dental caries detection using near infrared spatial frequency domain imaging

Detection and monitoring of early dental caries and erosion using three-dimensional enhanced truncated-correlation photothermal coherence tomography imaging

Accurate identification and detection of occlusal/smooth early caries using thermal-wave radar imaging (TWRI) technique under low temperature rising condition

Pilot Study on Early Detection of Dental Demineralization Based on Laser Induced Fluorescence

Study of validity of autofluorescence-based incipient occlusal caries detection in vitro compared to DIAGNOdent pen

Linear Polarization Detection of Polarization-Sensitive Optical Coherence Tomography in the Early Detection of the Application of Dental Caries

Characterization of dental caries using Optical Coherence Tomography

Experimental Investigation on the Caries Characteristic of Dental Tissues by Photothermal Radiometry Scanning Imaging

Evaluation of dental caries, tooth crack, and age-related changes in tooth structure using optical coherence tomography

Noninvasive Assessment of Early Dental Lesion Using a Dual-Contrast Photoacoustic Tomography

Fluorescence Spectrometry Based Chromaticity Mapping, Characterization, and Quantitative Assessment of Dental Caries.

Unveiling enamel demineralization mechanisms by sensitive dielectric differentiation based on terahertz nanospectroscopy

Machine Learning-Based Automatic Identification and Diagnosis of Dental Caries and Calculus Using Hyperspectral Fluorescence Imaging.

High-Frequency Heterodyne Lock-In Thermography (helit): A Highly Sensitive Method to Detect Early Caries

Quantitative analysis of the degree of demineralization for bleached enamel by optical coherence tomography

Tooth Structure Imaging with Optical Coherence Tomography