Abstract:This paper aims to investigate in detail the molten pool dynamics in keyhole TIG welding. Bimodal distributions of the heat flux and current density at the weld pool surface with significant deformation are proposed, which is a more physical model for such weld pools. Arc pressure and plasma shear force imposed on the weld pool are attained from the arc model. The two arc forces and Marangoni force are converted into corresponding volume forces, and compared with Lorentz force, buoyance and hydrostatic force (gravity) to examine their effects on the molten pool dynamics. Also, the keyhole collapse during the cooling of the weld pool is represented. It is found that the Gaussian-type distribution of the heat flux results in an excessive heat intensity at the molten pool surface and premature full penetration of the workpiece, while the bimodal distribution of that is found to be a substantial improvement in predicting weld pool shape and size. Both the arc pressure and plasma shear force are primarily responsible for the deformation of the weld pool and the flow within it, while the former is more significant for the depression of the weld pool and keyhole formation. All the other forces are of one or two orders of magnitude less than the arc forces, among which the buoyance is the weakest for outward melt flow and keyhole opening; both the Lorentz force and hydrostatic force are favourable to fill the keyhole and close it, whereas the latter becomes more significant as the weld pool volume increases, thus an imperative factor for the instability and collapse of the keyhole, which is the precursor for the formation of the cavity in the weld.

Mathematical analysis of the role of recoil pressure in weld pool dynamics during laser-MIG hybrid welding

Analysis of weld pool dynamic during stationary laser–MIG hybrid welding

Modeling of transport phenomena in hybrid laser-MIG keyhole welding

Investigation on the Weld Bead Profile Transformation with the Keyhole and Molten Pool Dynamic Behavior Simulation in High Power Laser Welding

3D Transient Multiphase Model for Keyhole, Vapor Plume, and Weld Pool Dynamics in Laser Welding Including the Ambient Pressure Effect

Numerical simulation of the molten pool character in high power fiber laser welding

Modeling the Transport Phenomena During Hybrid Laser-MIG Welding Process

Modeling of Hybrid Laser-Mig Keyhole Welding Process

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

Modeling of Weld Pool Dynamics During Dual-Beam Laser Welding Process

Influencing of Molten Pool Dynamic Behavior on the Weld Formation during the Laser‐Arc Hybrid Welding of 12 mm Thick Steel

Study on droplet transfer mechanical behavior in laser-MIG hybrid welding process

Numerical Analysis of Gravity-Induced Coupling Dynamics of Keyhole and Molten Pool in Laser Welding

Investigation of Mixing and Diffusion Processes in Hybrid Spot Laser–mig Keyhole Welding

Investigation of Mixing Phenomena in Hybrid Laser-Mig Keyhole Welding

Numerical Simulation on Flow and Heat Transfer in Weld Pool of Laser-Plasma Hybrid Welding

Experimental and Numerical Analysis of Molten Pool and Keyhole Profile During High-Power Deep-Penetration Laser Welding

The mathematical model for the prediction and optimization of weld bead geometry in all-position low-power pulsed laser-MAG hybrid welding

Research on Molten Pool Flow Characteristic in All-Position LP-LMH Welding

Numerical Analysis of Welding Defects in the Horizontal Position Laser-Metal Inert Gas Hybrid Fillet Welding

Study of molten pool dynamics in keyhole TIG welding by numerical modelling