Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

Experimental and numerical study on non-contact explosive driving projectile accelerator

Method of Determining the Critical Impact Velocity of Energetic Devices

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

Low speed impact simulation of explosive charge based on three-dimensional numerical manifold method

Scaled Experiment of the Detonation Control System for the High-Speed Penetration on Concrete

Experimental and numerical study on the flight and penetration properties of explosively-formed projectile

Simulation of high explosive explosion using adaptive material point method

In-Bore Dynamic Measurement and Mechanism Analysis of Multi-Physics Environment for Electromagnetic Railguns

Numeric Simulation Analysis of Projectile Supplement Mechanism of Artillery

Experimental Studies on Kinetic Projectile's Direct Penetrations with Low-speed Against Reinforced Concrete Targets

Experimental and theoretical investigation of the failure behavior of a reinforced concrete target under high-energy penetration

Numerical Simulation of the Effect of Blast Shock Wave on Target Plate

AN EXPERIMENTAL STUDY ON HEAT PROCESSES PROPERTES OF LIQUID PROPELLANT ROCKET EXPLOSION

Characterization of the cytoskeleton in human normal and otosclerotic osteoblast-like cells.

Numerical simulation of column charge explosive in rock masses with particle flow code

Response Amplification Study of the Simulated Projectile under Typical Boundary Conditions

Influence of material properties and geometric parameters of an impact pair on contact acceleration during a low-velocity impact

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Experimental Studies on Structural Response and Mass Loss of HighVelocity Projectiles Penetrating into Reinforced Concrete Targets

Study on the coupling calculation method for the launch dynamics of a self-propelled artillery multibody system considering engraving process

High-power Impact Experimental Generation Analysis Using Hydraulic Impact Simulation Tester