Abstract:The application of mobile robots is an important link in the development of intelligent greenhouses. In view of the complex environment of a greenhouse, achieving precise positioning and navigation by robots has become the primary problem to be solved. Simultaneous localization and mapping (SLAM) technology is a hot spot in solving the positioning and navigation in an unknown indoor environment in recent years. Among them, the SLAM based on a two-dimensional (2D) Lidar can only collect the environmental information at the level of Lidar, while the SLAM based on a 3D Lidar demands a high computation cost; hence, it has higher requirements for the industrial computers. In this study, the robot navigation control system initially filtered the information of a 3D greenhouse environment collected by a 3D Lidar and fused the information into 2D information, and then, based on the robot odometers and inertial measurement unit information, the system has achieved a timely positioning and construction of the greenhouse environment by a robot using a 2D Lidar SLAM algorithm in Cartographer. This method not only ensures the accuracy of a greenhouse environmental map but also reduces the performance requirements on the industrial computer. In terms of path planning, the Dijkstra algorithm was used to plan the global navigation path of the robot while the Dynamic Window Approach (DWA) algorithm was used to plan the local navigation path of the robot. Through the positioning test, the average position deviation of the robot from the target positioning point is less than 8 cm with a standard deviation (SD) of less than 3 cm; the average course deviation is less than 3° with an SD of less than 1° at the moving speed of 0.4 m/s. The robot moves at the speed of 0.2, 0.4, and 0.6 m/s, respectively; the average lateral deviation between the actual movement path and the target movement path is less than 10 cm, and the SD is less than 6 cm; the average course deviation is <3°, and the SD is <1.5°. Both the positioning accuracy and the navigation accuracy of the robot can meet the requirements of mobile navigation and positioning in the greenhouse environment.

Mobile robot travel environment description based on 3D laser point cloud

3D Map Building for Mobile Robot under Unknown Outdoor Environments

3-D Map Reconstruction in Cross-country Environment

Global Localization For Mobile Robots In Indoor Environment

Map building for indoor environment with laser range scanner

Path Planning for Autonomous Mobile Robot In Unknown Environments

LOW-COST WHEELED ROBOT-BORNE LASER SCANNING SYSTEM FOR INDOOR AND OUTDOOR 3D MAPPING APPLICATION

Outdoor Scene 3D Reconstruction from Multiple Point Cloud

Coarse-to-fine Hybrid 3D Mapping System with Co-calibrated Omnidirectional Camera and Non-repetitive LiDAR

A Multi-robot Collaborative Autonomous Mapping System based on 2D Lidar

An Effective Way of Constructing Static Map Using 3D LiDAR for Autonomous Navigation in Outdoor Environments

Mapping 3D visibility in an urban street environment from mobile LiDAR point clouds

Three-Dimensional Lidar Localization and Mapping with Loop-Closure Detection Based on Dense Depth Information

3D point-cloud mapping using laser scanner mounted on two-wheeled vehicle based on NDT scan matching

A Novel Radar Point Cloud Generation Method for Robot Environment Perception

Environment Mapping Using Sensor Fusion of 2D Laser Scanner and 3D Ultrasonic Sensor for a Real Mobile Robot

Safe and Robust Mobile Robot Navigation in Uneven Indoor Environments

Change of Scenery: Unsupervised LiDAR Change Detection for Mobile Robots

Autonomous Navigation System of Greenhouse Mobile Robot Based on 3D Lidar and 2D Lidar SLAM

Urban Three-dimensional (3-D) Road Surface Reconstruction Based on a Data Assimilation Algorithm Using a Mobile Laser Scanning (MLS) System