Abstract:Reinforcing steel corrosion in concrete is a main reason for the deterioration of durability of reinforced concrete structures. The widespread corrosion of reinforcing steel caused by chloride ions is a common and serious problem all over the world. Obviously, corrosion protection of reinforcing steel in concrete has become an urgent and important task. The use of corrosion inhibitors is one of the promising protection methods for controlling steel corrosion in concrete because of their low cost and easy application. The development and application of surfactant corrosion inhibitors have drawn special attention. Many surfactants have inviting application prospects for the corrosion protection of metals. Cetyltrimethylammonium bromide (CTMAB), a cationic surface active agent, has been studied for metal corrosion protection due to its main advantages of non-toxicity and a popular price. Nevertheless, there is little information on CTMAB as a corrosion inhibitor for steel in concrete. In this work, the surfactant CTMAB was employed as a corrosion inhibitor and its inhibition performance against reinforcing steel corrosion in the simulated concrete pore solutions was studied by electrochemical measurements and surface analyses. The cylindrical specimens with Ø11.2 mm × 4 mm were cut from a Q235 reinforcing steel bar. The specimen mounted in epoxy resin was used as the working electrode with an exposed area of 1.00 cm 2 during electrochemical measurements, and a platinum sheet and a saturated calomel electrode (SEC) served as the auxiliary electrode and the reference electrode, respectively. The compositions of the specimens were analyzed by X-ray energy dispersive spectroscopy (EDS), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), and their morphologies were observed by scanning electron microscopy (SEM). A saturated Ca(OH) 2 solution with pH about 12.50 was selected as a simulated concrete pore solution. After the solution was adjusted to pH 11.00 with a 0.8 mol/L NaHCO 3 solution and 0.5 M NaCl was added, it served as a simulated polluted concrete pore (SPCP) solution, namely a test solution. Then different concentrations of CTMAB were added to the SPCP solution to investigate the corrosion inhibition effect of CTMAB on the reinforcing steel. The EIS analysis of the steel in the SPCP solution showed the capacitive reactance arc size increased gradually while the CTMAB concentration was increased from 0 to 0.005 M, then decreased with the increasing of the CTMAB concentration from 0.005 to 0.1 M. When the CTMAB concentration was 0.005 M, the interfacial charge transfer resistance ( R ct ) of the steel reached a maximum of 41.17 kΩ cm 2 , and the inhibition efficiency of CTMAB was 79.9%. The inhibition efficiency of CTMAB determined from the polarization curve of the steel in the SPCP solution with 0.005 M CTMAB reached 87.6%, indicating that the CTMAB could inhibit corrosion of reinforcing steel effectively. For the SPCP solution without CTMAB there was not a passive region on the potentiodynamic anodic polarization curve of the steel, indicating that the steel corrosion took place. However, the steel was in a passive state for the solution with 0.005 M CTMAB. The SEM results also indicated that CTMAB could protect the steel from corrosion. XPS and Raman results proved that CTMAB was an adsorption type corrosion inhibitor. The adsorbed CTMAB resulted in the formation of a protective film on the steel surface to protect the steel from corrosion.

Protection of organic corrosion inhibitor to steel bar in simulated concrete pore solution

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Simulated pore water of chloride-contaminated concrete by means of electrochemical techniques

Effect of Diamino ( ( 2-( ( 2-Aminoethyl ) Amino ) Ethyl ) Amino ) Methanethiol on the Corrosion Resistance of Carbon Steel in Simulated Concrete Pore Solutions

EFFECTIVENESS OF MIGRATORY CORROSION INHIBITORS IN SIMULATED PORE WATER OF CHLORIDE-CONTAMINATED CONCRETE BY MEANS OF ELECTROCHEMICAL TECHNIQUES

Molecule adsorption and corrosion mechanism of steel under protection of inhibitor in a simulated concrete solution with 3.5% NaCl

Electrochemical and Analytical Characterization of Three Corrosion Inhibitors of Steel in Simulated Concrete Pore Solutions

Comparative Studies on Steel Corrosion Resistance of Different Inhibitors in Chloride Environment: the Effects of Multi-Functional Protective Film

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Effect of Sodium D-Gluconate-Based Inhibitor in Preventing Corrosion of Reinforcing Steel in Simulated Concrete Pore Solutions

Inhibition Performance of Cetyltrimethylammonium Bromide Against Reinforcing Steel Corrosion in Simulated Concrete Pore Solutions

Study on Corrosion Inhibition of Reinforcing Steel in Simulated Concrete Pore Solutions by Scanning Microelectrode Technique

CORRELATION BETWEEN COMPOSITION OF REINFORCING STEEL SURFACE FILM AND STEEL CORROSION BEHAVIOR IN SIMULATED CONCRETE PORE SOLUTIONS

Corrosion Performance of Steel Reinforcement in Simulated Concrete Pore Solutions in the Presence of Imidazoline Quaternary Ammonium Salt Corrosion Inhibitor

Experimental Study on Multi-Component Corrosion Inhibitor for Steel Bar in Chloride Environment

Influence of Chloride Ions on Corrosion Behavior of Steel Bars in a Simulated Concrete Pore Solution

Inhibition Resistance and Mechanism of Migrating Corrosion Inhibitor on Reinforced Concrete under Coupled Carbonation and Chloride Attack