Abstract:A coupled boundary element method (BEM) and finite difference method (FDM) are applied to solve conjugate heat transfer problem of a three-dimensional air-cooled turbine blade. A loosely coupled strategy is adopted, in which each set of field equations is solved to provide boundary conditions for the other. In the fluid region, computation code (HIT-NS CODE) adopts the FDM to solve the Navier-Stokes equations. In the solid region, the BEM is adopted to resolve the conduction heat transfer equations. An iterated convergence criterion is the continuity of temperature and heat flux at the fluid-solid interface. The solid heat transfer computation code (3D-BEM CODE) is validated by comparing with the results of an analytic solution and the results of commercial code, the results from 3D-BEM CODE have a good agreement with the analytic solution and commercial code results. The BEM uses a weighted residual method to make the Laplace equation convert into a surface integral equation and the surface integral equation is discretized. The BEM avoids the complicated mesh needed in other computation methods and saves the computation time. In addition, the BEM has the characteristic of a combination of an analytic and a discrete solution. So the BEM solutions of heat conduction problems are more accurate. The results of the coupling computation code (HIT-NS-3DBEM CODE) have a good agreement with the experimental results. The adiabatic condition result is different from the results of experiment and code calculation. So the results from conjugate heat transfer analysis are more accurate and they are closer to realistic thermal environment of turbines. Four turbulence models arc applied: K-epsilon model, K-omega model, K-omega (SST-Gamma Theta) model, and B-L model adopted by computation code. Different turbulence models gives different the results of vane wall temperature. Comparing the four turbulence models, the different turbulence models can exactly simulate the flow field, but they can not give exact values for the heat conduction simulation in the boundary layer. The result of K-Omega (SST-Gamma Theta) turbulence model is closer to the experimental data.

Application of Boundary Element Method in the Gas-thermal Coupled Calculation of an Air-cooled Turbine Cascade

Application of Discontinuous Galerkin Method in Air-cooled Turbine Flow Thermal Coupling Calculation

The Application Of Discontinuous Galerkin Methods In Conjugate Heat Transfer Simulations Of Gas Turbines

Coupled Bem And Fdm Conjugate Analysis Of A Three-Dimensional Air-Cooled Turbine Vane

Bem/Fdm Conjugate Heat Transfer Analysis of A Two-Dimensional Air-Cooled Turbine Blade Boundary Layer

Method for Calculating the Flow Field in an Air-cooling Turbine Cascade and Its Applications

Application of Heat Transfer Coefficient Criteria Formulas for the Conjugate Heat Transfer Analysis of a Gas Turbine

Numerical simulation on conjugate heat transfer of turbine cascade

Coupled Heat Transfer Predictions of Thermal Environment for a Turbine Rotor

Application of Boundary Element Method to Static Fluid-Solid Coupling Problems

Numerical Method for Coolant Mixing in Turbine Cascade Flow Field

Numerical Investigation of Air-cooled Gas Turbine Flow and Thermal Stress Characteristics

Conjugate Heat Transfer Numerical Validation and PSE Analysis of Transonic Internally-Cooled Turbine Cascade

Coupled Heat Transfer Simulation of a Low-Pressure Turbine Vane

Numerical Simulation of the Influence of Bowed Blade on the Performance of Turbine Cascade with Film-Cooling

Modified Nodal Expansion Method for Convection-diffusion Equation in Cylindrical Geometry

Multi-Dimensional Platform For Cooling Design Of Air-Cooled Turbine Blades

Fluid-Thermal-Structural Coupled Analysis of a Radial Inflow Micro Gas Turbine Using Computational Fluid Dynamics and Computational Solid Mechanics

Conjugate Heat Transfer Simulation of a High Pressure Air-Cooled Gas Turbine with Transition Flow Characteristics

Numerical Study on Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling

Boundary element method used for the calculation of centrifugal fan noise radiation