Abstract:Anechoic coating attached to the surface of an underwater object is used for absorbing sound wave thereby reducing the reflection. The anechoic coating is often made of viscoelastic materials embedded with designed acoustic substructures, such as air cavities. The prediction of sound scattering on underwater object coated with such materials can be challenging due to the complex geometry of the anechoic coating, and it has been a research subject of interest in underwater acoustics. In this paper, we study the sound scattering on an infinite cylindrical shell coated with anechoic coating. Two types of coatings are considered: one is a layer of homogeneous isotropic material, and the other is a layer of homogeneous isotropic material with periodically embedded cylindrical air cavities. We use an equivalent method, in which the anechoic coating with air-filled cavities is regarded as a homogeneous isotropic material with equivalent material properties. The key point of the equivalent method is to ignore the internal structure of the anechoic coating, and the anechoic coating is considered as a homogeneous isotropic layer with the same complex reflection coefficient. These equivalent material properties are acquired based on the data of complex reflection coefficient obtained from either the physical experiment using water-filled impedance tube or the numerical experiment using the finite element method with COMSOL Mutiphysics software. Then a genetic algorithm is developed to inversely calculate the equivalent Young's modulus, Poisson's ratio, and damping loss factor of the coating which has the same reflection coefficient as the original coating. The results of the equivalent material properties show that 1) the three properties are all frequency dependent; 2) in general, equivalent Young's modulus increases with the increase of frequency, meanwhile the equivalent damping loss factor tends to decrease; 3) there is a wide variation in the results of equivalent Poisson's ratio. Despite that, the reflection coefficient of the equivalent homogeneous isotropic coating accords well with that of the original coating.Based on the above, the sound scattering on the infinite cylindrical shell coated with the equivalent coating is calculated by using the finite element method based on COMSOL Mutiphysics software. In order to verify the accuracy of the equivalent model, we use COMSOL Mutiphysics software to build up the full geometrical model of the coated shell to calculate the sound scattering. This can be considered as the benchmark. The results of morphic function show that the scattering calculated using equivalent material properties accords well with that obtained from the full finite element model with a mean error of about 1 dB in all frequency spectrum range.

The Absorption Characteristics of Anechoic Coating Embedding Mixed-Cavity Structure with Single or Double Shell Backing

Analysis of absorption performances of anechoic layers with steel plate backing.

Study on Characteristics of Sound Absorption of Underwater Visco-elastic Coated Compound Structures

Absorption characteristics of anechoic coating on cavity structure and its optimization design

Absorption Characteristics of Anechoic Coating Embedding Elliptic-Cylinder Cavities

Study of the Absorption Characteristics of Alberich Anechoic Coating Based on the Finite Element Method

Ultrathin and Pressure-Resistant Meta-Coating with Embedded Tree-Shaped Acoustic Black Hole for Broadbnd Low-Frequency Underwater Sound Absorption

The underwater acoustic scattering characteristics of cylindrical shells: Effect of a coating made of micro floating raft arrays

Analysis of underwater sound absorption of visco-elastic composites coating containing micro-spherical glass shell

Sound absorption mechanism of underwater anechoic coating with spherical cavities

Subwavelength and Quasi-Perfect Underwater Sound Absorber for Multiple and Broad Frequency Bands.

Analysis of the Anechoic Properties of Viscoelastic Coatings with Periodically Distributed Cavities

Investigation on Low-Frequency and Broadband Sound Absorption of the Compact Anechoic Coating Considering Hydrostatic Pressure

Absorption Characteristics of Anechoic Coating Embedding Frustum-of-a-cone Cavities

Underwater Anechoic Layer with Parallel Metallic Plate Insertions: Theoretical Modelling

Underwater sound scattering and absorption by a coated infinite plate with a distributed inhomogeneity.

Investigation of Underwater Sound Scattering on A Cylindrical Shell Coated with Anechoic Coatings by the Finite Element Method Based on an Equivalent Parameter Inversion

Underwater Acoustic Absorption of Composite Anechoic Layers with Inner Holes

On the Accuracy and Optimization Application of an Axisymmetric Simplified Model for Underwater Sound Absorption of Anechoic Coatings

Absorption Performance of an Anechoic Layer with a Steel Plate Backing at Oblique Incidence

Optimization Design of Acoustic Performance of Underwater Anechoic Coatings