Abstract:The CDEX (China Dark matter Experiment) is currently in the stage to upgrade to approximately 10 kg HPGe (High Purity Germanium) detectors (CDEX-10) in CJPL (China Jinping Underground Laboratory) and aims to detect the WIMP (Weakly Interacting Massive Particles). Six analog signals and one inhibited signal are outputted from preamplifier by one HPGe detector (∼ 1 kg) of CDEX-10. The analog signals are conditioned with two 6 μs and one 12 μs shaping amplifiers, and three timing amplifiers respectively. The inhibited signal is used for trigger. The analog signals from shaping and timing amplifiers are digitized to obtain energy spectrum and rise-time distribution. The rise-time distribution is used to discriminate surface, bulk, and very bulk events, which can help to supress the background level in dark matter detection. Composed of commercial modules, the previous DAQ (Data Acquisition Systems) is insufficient in discriminating between bulk and very bulk events due to the limited sampling rate (100 MSPS). Besides, as number of channel increases, the system will be simplified by integrating the trigger logic in FPGA (Field Programmable Gate Array). In this paper, a prototype named RAIN4HPGe is designed with pulse digitizer and readout electronics, integrating 14-bit 100 MSPS ADCs (Analog-to-Digital Converters), 12-bit 1 GSPS ADCs, FPGA etc. . The RAIN1000Z1 readout module based on ZYNQ SoC (System on Chip) is used for readout over Gigabit Ethernet. Better energy resolution, e.g. improving from 558 eV to 474 eV @122 keV, can be achieved by RAIN4HPGe compared to previous DAQ (Data Acquisition Systems) with commercial solution. Moreover, the discrimination performance of bulk, and very bulk events has been improved by RAIN4HPGe with 1 GSPS ADC.

The Design and Realization of General High-Speed RAINI OOB DAQ Module Based on PowerPC MPC5200B Processor

FPGA Implementation of High-Speed Data Acquisition System for High-Resolution Millimeter Wave Radar.

Design and Development of Embedded Turbine Supervisory Instruments Based on Arm and Linux

Logical Architecture Design of Integrated Electronic System with High Real-Time and Reliability in ZDPS-2 Pico-Satellite

The Design and Data-Throughput Performance of Readout Module Based on ZYNQ SoC

Readout System with 2-Channel 8-Bit 1ghz Fadc Based on Rain1000z1 Zynq Module for Crystal Detector

Prototype of Pulse Digitizer and Readout Electronics for CDEX-10 in CJPL

Design and Implementation of High Performance DAQ System for IRFPA Testing

Design of EPICS IOC based on RAIN1000Z1 ZYNQ module

Design and application of readout module ZYNQBee with Gigabit Ethernet interface based on ZYNQ

A General-Purpose Digital Data Acquisition System (GDDAQ) at Peking University

The Prototype Design of Integrated Base for PMT with Pulse Digitalization and Readout Electronics

A multi-channel DAQ system based on FPGA for long-distance transmission in nuclear physics experiments

Design and Realization of a Nuclear Logging Data Acquisition System Based on Compact PCI Architecture

Design on a High-Speed Image Collecting System

Hardware/software co-design of an ATCA-based computation platform for data acquisition and triggering

Design of real-time data acquisition and processing system based on DMA way

Data Acquisition Software for CBM-TOF Super Module Quality Control

Preliminary Design of Pulse Digitalization and Readout Electronics for CDEX-10

Design of Giga Bit Ethernet Readout Module Based on ZYNQ for HPGe

Data acquisition system design of high-speed ECT system