Abstract:In order to improve the intrinsic brittleness of TiAl alloys, Ti2AlNb alloys with outstanding ductility and toughness at room temperature, and good high-temperature performance are competitive candidates in constructing the TiAl-based laminated composites. In this work, TiAl/Ti2AlNb laminated composites are successfully synthesized by vacuum hot pressing combined with the foil-foil (sheet) metallurgy. Under the pressure of 65 MPa, different holding time and temperature of hot pressing are tried and the optimized fabrication parameter is acquired as 1050 degrees C/120 min/65 MPa. Along with the changes of processing parameters, the defect, microstructure, interface, phase transformation and the corresponding mechanical properties are detailly discussed. The results show that the TiAl/Ti2AlNb laminated composite fabricated at 1050 degrees C for 2 h achieves a good metallurgical interface bonding. The corresponding interface microstructure is composed of region I and region II. The region I consists of O, alpha(2) and B2/beta phase, and region II is made up of oz 2 . Subsequently, the tensile tests indicate that the composite synthesized at 1050 degrees C for 2 h possesses a maximum strength of 812 MPa and a total elongation of 1.31% at room temperature, and a strength of 539.71 MPa and the highest total elongation of 10.34% at 750 degrees C. The well synergistic deformation ability between the interface and the two base alloys endows the composite an excellent tensile performance. Moreover, the composite processed at 1050 degrees C for 2 h behaves the best fracture toughness in both arrester orientation and divider orientation with the value of 32.6 MPa.m 112 and 30.1 MPa.m(1/2), respectively. The Ti2AlNb alloy in the laminated structure effectively release the stress around the crack tip and plays a role in toughening. Further, crack deflection, crack bridging, crack blunting and fragmentation also make contributions to enhance the fracture toughness of the laminated composites. (C) 2021 Published by Elsevier Ltd on behalf of Chinese Society for Metals.

Preparation of NiTi/NiTiNb Laminated Alloys by Vacuum Brazing

Fabrication and Property of W/Tininb Shape Memory Alloy Laminated Composite

Fabrication of multi-functional Ni–Ti alloys by laser powder bed fusion

Fabrication of Integrated Ni-Ti Alloys Possessing Both Super-elastic and Shape Memory Properties by Laser Powder Bed Fusion

Vacuum Brazing High Nb-containing TiAl Alloy to Ti60 Alloy Using Ti-28Ni Eutectic Brazing Alloy

Interfacial structure and properties of reactive brazing joints of TiAl/Ni-based alloy

Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication

Dissimilar Laser Welding of a NiTi Shape Memory Alloy to Ti2AlNb

Evaluation of Microstructure and Mechanical Properties of TiAl/HI-TEMP 820/ SCM440H Materials Manufactured through Vacuum Brazing according to Process Temperature

Effect of Processing Parameters on the Microstructure and Mechanical Properties of TiAl/Ti2AlNb Laminated Composites

Study on interface and mechanical property of laser welding of NiTi shape memory alloy and 2A12 aluminum alloy joint with a TC4 wire

Deformation Behavior and Fracture Mechanism of a Novel Laminated Ni/Al Sheets During In-Situ Tensile Process

VACUUM BRAZING OF TiAl-BASED ALLOY AND Ti ALLOY

Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer.

Brazing TiAl intermetallics using TiNi–V eutectic brazing alloy

Toward additive manufactured crack-free NiTiCu shape memory alloys with low-hysteresis and tailorable phase transition behavior supported by theoretical design

Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: A review

In-situ alloying of NiTiNb ternary shape memory alloys via laser powder bed fusion using pre-alloyed NiTi and elemental Nb powders: Microstructure, phase transformation behavior and functional properties

Strengthening Mechanism and Micropillar Analysis of High-Strength NiTi–Nb Eutectic-Type Alloy Prepared by Laser Powder Bed Fusion

Microstructural Evolution and Mechanical Properties of Vacuum Brazed Ti 2 AlNb Alloy and Ti60 Alloy with Cu75 P T Filler Metal

Effect of solution treatment on the microstructure, phase transformation behaviour and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying