Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Reverberation-ray Analysis of Dispersion of Elastic Waves in a Box-Girder

An analytical method and its application for large-section PC box girder bridges

On calculating dispersion curves of waves in a functionally graded elastic plate

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Reverberation-ray analysis of moving or distributive loads on a non-uniform elastic bar

Recursive Formulae for Wave Propagation Analysis of FGM Elastic Plates Via Reverberation-Ray Matrix Method

Short- and Long-Term Analyses of Shear Lag in Rc Box Girders Considering Axial Equilibrium

Analysis of Free Vibration Characteristics of Thin-walled Box Girder Based on Energy Variation Principle

Elastodynamic Theory of Framed Structures and Reverberation-Ray Matrix Analysis

Passive reconstruction of dispersion curve in plates via flow-induced random vibration: The effect of boundary reflection and sensor placement

Reverberation ray matrix analysis for wave propagation in beam structures with rigid components

Extension and Application of Reverberation-Ray Matrix Method to Dynamic Responses of Structures

Reverberation-ray Matrix Analysis for Wave Propagation in Multiferroic Plates with Imperfect Interfacial Bonding

Spatial Finite Element Analysis for Dynamic Response of Curved Thin-Walled Box Girder Bridges

Dynamic Response Analysis for a Large Cantilever Rectangular Box Girder in Consideration of Shear Lag Effect

The dispersion curve applied in guided wave propagation in prismatic rods.

Vibration and Sound Radiation Analysis of Rectangular Plates Resting on Winkler Foundation in Thermal Environment with Closed Form Solutions

Dispersion Analysis of Lamb Waves in Composite Laminates Based on Reverberation-Ray Matrix Method

Dynamics of a Prestressed Timoshenko Beam Subject to Arbitrary External Load

Dynamics Response of Thin-Walled Rectangle Box Girders Considering Shear Lag Effect

Application of the Method of Reverberation Ray Matrix to the Early Short Time Transient Responses of Stiffened Laminated Composite Plates