Abstract:The study proposes a Kalman Filter Family-schemed algorithm to identify the vehicle’s parameters and evaluate the road roughness simultaneously, based on the response of an adapted monitoring vehicle. The vehicle is simplified as a three-dimensional multi-body system consisting of the unsprung mass of wheels and the sprung mass of the car body, connected by springs and dampers that represent the suspension system. Accelerometers and a gyroscope measure the accelerations or angular velocity of different positions of the vehicle during vibrations. The Kalman filter (KF) with unknown inputs enables the prediction of the car body’s accelerations from those of wheels. On the other hand, the Augmented KF can compute the accelerations of wheels based on the car body’s accelerations. Thus, an inner-systemic objective function incorporating the vehicle’s parameter is built between the predicted and measured accelerations and solved in an optimized manner with the Genetic Algorithm, so that an individual complicated impact test or bump test is avoided. The numerical examples carry out field tests on a 900[Formula: see text]m long standardized test road under two scenarios of with and without a bump. The road roughness estimated by these two KF methods from different measurements is used to calculate the International Roughness Index (IRI) and further the Riding Quality Index, which are compared with those directly provided by a standardized laser IRI profilometer. Accordance in between confirms the accuracy of the proposed algorithm under different scenarios. The analysis underlines the measurements from unsprung wheels that contact directly with the road enable a more accurate estimation of road roughness than those from the sprung car body. In addition, a vehicle speed lower than 40[Formula: see text]km/h can provide a better estimation of the road profiles.

Modeling of excitation of random road profile for a vehicle with four wheels

Analysis of Stochastic Dynamic Pressure of Vehicle on Rough Pavement

Equivalent Vehicle Dynamic Load Coefficient on Rough Pavement

3-D random excitation road surface modeling and simulation

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Road-friendliness of interconnected hydro-pneumatic suspension based on ADAMS/Simulink/AMESim

Modelling and simulation of driving dynamics of wheeled launch system under random road surface excitation

On vehicle response under non-Gaussian road profile excitation

Ride Comfort Simulation of Tracked Vehicles from Stochastic Excitation Based on Road Surface Spectrum

Study on the Characteristics of Domain Models of Road Irregularity Excitation by Simulation

Research on Vehicle Vibration Fatigue Damage Potential under Non-Gaussian Road Profile Excitation

Estimation of Road Roughness Based on Both the Sprung and Unsprung Response of a Moving Vehicle over Ordinary Roads: Modeling, Experiments and Discussions

Simulation Comparison and Evaluation of Common Time Domain Models under Road Irregularity Excitation

Prediction and Optimization of Full-Vehicle Road Noise Based on Random Response Analysis

Simulation of Road Surface Power Spectrum Density Identification

Autocorrelation Model of Road Roughness

Analysis of real-time energy losses of electric vehicle caused by non-stationary road irregularity

Research on simulation and optimization of vehicle road noise based on random method

A probabilistic model for track random irregularities in vehicle/track coupled dynamics

Dynamic Simulation of Tracked Vehicle Vibration System Based on Three-dimensional Road Surface Spectrum Model

Research on optimization control of vehicle road noise performance