Abstract:Aiming at the existing voltage sag localization methods with complex models, large calculation volume, low localization efficiency, and large error due to the influence of measurement error and fault type, and other shortcomings, this paper proposes a method for locating voltage sag sources based on power polarity and twin characteristics matching. The correctness and superiority of the proposed method is verified based on IEEE33 node modelling. Precisely locating the voltage sag sources is significant for improving power quality and clarifying the responsibilities of both power supply and consumption. However, the existing location models are complex, computationally intensive, and influenced by the measurement error and fault type, which have low positioning efficiency and large errors. Therefore, this paper proposes a method for locating voltage sag sources based on power polarity and twin characteristics matching. The method firstly uses the polarity of the sequence sag component disturbance reactive power at the monitoring point to determine the sag line. Secondly, the basic realization method of the twin power system is discussed, and the twin characteristics are defined by combining the positive and negative sequence sag component disturbance reactive power and the twin database is established. Thirdly, the spectral norm and Pearson product‐moment correlation coefficient are used to define the data matching degree, and the precise location model of the sag source is established with the objective function of maximizing the data matching between the twin characteristics of the preset and actual sag. Finally, the Improved Whale Optimization Algorithm is used to solve the location model. The correctness and superiority of the proposed method is verified based on IEEE33 node modelling.

Bad Data Identification in Voltage Sag State Estimation of Distribution System

Bad Data Identification for Voltage Sag State Estimation in Distribution System with Wind Farm Connections

The Voltage Sags State Estimation Observability Analysis in Complicated Distribution Systems

A Novel Voltage Sag Detection Method Based on a Selective Harmonic Extraction Algorithm for Nonideal Grid Conditions

Voltage Sag Diagnosis Using Big Data Analysis

Identification of the Area of Vulnerability to Voltage Sags Based on Galerkin Method

A novel voltage sag state estimation method based on complex network analysis

Distribution Joint State Estimation with Multiple Snapshots Based on SCADA and AMI Measurements

A Fast Voltage Sag Detection Method Based on Second Order Generalized Integrator and Delay Transform Method

Dynamic State Estimation Method for Generator Considering Measurement of Bad Data

Multi-Stage Voltage Sag State Estimation Using Event-Deduction Model Corresponding to EF, EG, and EP

Voltage sag source location based on sag event amplitude information

Research on Bad Data Detection in Power Grid Based on Improved Algorithm

Voltage sag source location based on power polarity and twin characteristics matching

A New Approach for Detection and Identification of Multiple Bad Data in Power System State Estimation

Risk assessment of voltage sag based on multi-source data mining

A bad data identification algorithm based on voltage code

Voltage Sag Source Location Based on Instantaneous Energy Detection

A Deep Learning Method Based on Bidirectional WaveNet for Voltage Sag State Estimation via Limited Monitors in Power System

Voltage sag sensitive load type identification based on power quality monitoring data

Detection method of voltage sag disturbance based on improved HHT