Abstract:Porous materials are used as pneumatic components in a wide range of industrial applications. Such porous materials contain thousands of interconnected irregular micro-pores that produce a large pressure drop (Delta P) between the upstream and downstream sides of the porous material when a fluid flows through it. The relationship between the pressure drop and flow rate (i.e., the Delta P-G characteristic) and the relationship between flow resistance (gamma) and flow rate (the gamma - G characteristic) are two very important basic characteristics. One factor affecting them is temperature, whose variation changes the viscosity and density of the fluid. In this study, we experimentally and theoretically analyzed the effect of temperature on Delta P - G and flow resistance characteristics of porous materials by heating them under constant electric heating power. The resulting experimental Delta P - G and flow resistance curves shift upward relative to their counterparts at room temperature owing to the increase in fluid temperature, but remain within the adiabatic and room temperature curves. The temperature-effect ratio eta at constant heating power increases from 1.3 to 1.7 as the flow rate decreases from 21.53 x 10(-5) kg/s to 5.80 x 10(-5) kg/s, indicating that Delta P - G and flow resistance characteristics and pumping power change significantly when a porous material is heated. Furthermore, temperature distributions were obtained numerically to gain deeper understanding of the temperature effect. The effects of heating power values, characteristic porous material coefficients, and average fluid density on Delta P - G and flow resistance characteristics were also investigated. (C) 2016 Elsevier Ltd. All rights reserved.

Investigation of Pressure Drop for Fluid Flow Through Porous Media: Application to A Pebble-Bed Reactor

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Measurement and Correlation of Pressure Drop Characteristics for Air Flow Through Sintered Metal Porous Media

Pressure Drop and Fluid Flow Characteristics in a Packed Pebble Bed Reactor

Determination of Pressure Drop for Air Flow Through Sintered Metal Porous Media Using A Modified Ergun Equation

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Study of Pressure Drop-Flow Rate and Flow Resistance Characteristics of Heated Porous Materials under Local Thermal Non-Equilibrium Conditions

Experimental study on pressure drop of packed beds with binary sintered ore particle mixtures

Effect of Tip Clearance on the Heat Transfer and Pressure Drop Performance in the Micro-Reactor with Micro-Pin–fin Arrays at Low Reynolds Number

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

Holistic Hydraulic Simulation for Pebble Bed Using Porous Media Approach

Numerical Methods and Simulation for Pebble Flows

Analysis of the flow field and pressure drop in fixed-bed reactors with the help of lattice Boltzmann simulations

High-fidelity simulation of pebble beds: Toward an improved understanding of the wall channeling effect

Dynamic Pressure Drop Property of Gas-Liquid Two-Phase Flow around a Horizontal Cylinder

Pressure Drop Profiles in Porous Media Combustion System With Reciprocating Flow

A Review of Recent Study on the Characteristics and Applications of Pebble Flows in Nuclear Engineering

Porous Structure Analysis of the Packed Beds in A High-Temperature Reactor Pebble Bed Modules Heat Transfer Test Facility

Research on Flow Field Characteristics and Force Analysis of Fuel Elements Pneumatic Transportation in a Pebble Bed Reactor

Experimental Research and Dem Simulations on Stagnant Region in Pebble Bed Reactor

Porous Structure Analysis of Large Scale Randomly Packed Pebble Bed in High Temperature Gas Cooled Reactor