Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

Three-dimensional series solution for dynamic stress concentration of an underground cylindrical lined cavity subjected to incident plane P waves

Dynamic stress concentration of an underground cylindrical lined cavity subjected to incident plane SH waves(Ⅰ) :3-D series solution

Dynamic stress concentration of an underground cylindrical lined cavity subjected to incident plane SH waves (Ⅱ) :numerical results

Dynamic Stress Concentration of an Underground Cylindrical Lined Cavern Subjected to Incident Plane SV Waves and Rayleigh Waves (I): 3-D Series Solution

Dynamic interaction of circular tunnel in viscoelastic saturated soil

Dynamic Response of Partially Sealed Circular Tunnel in Viscoelastic Saturated Soil

Scattering of Elastic Wave by Circular Lining in Nearly Saturated Soil

Analytical solution to cavity expansion in linear softening soil

Unified Solution of a Borehole Problem with Size Effect

Elastoplastic Solution of Cylindrical Expansion with Fixed Boundary

Analysis Of Three-Dimensional Dynamic Response Of A Circular Lining Tunnel In Saturated Soil To Harmonic Loading

Anti-Plane Dynamics Analysis of a Circular Lined Tunnel in the Ground under Covering Layer

Dynamic anti-planar characteristics of circular holes in laminated structures under the action of line source

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

Aseismic Performance Analysis of Composite Lining Embedded in Saturated Poroelastic Half Space

Dynamic response of semi-cylindrical depression, cylindrical cavity and type-III crack to SH wave in half-space anisotropic media

Dynamic stress analysis of circular cavity in density inhomogeneous multi-layer soil structures containing a canyon

Analytical Solution of Transient Dynamic Response of Spherical Cavity in Viscoelastic and Saturated Soils

Semi-analytical solution for stress and displacement of lined circular tunnel at shallow depths

Amplification of Rayleigh waves due to underground lined cavities

Dynamic response mechanism of the hole subjected to the 3D point source disturbance in an isotropic formation