Abstract:The failure mechanism of surrounding rock and the formation of rockburst in deep rockmass are influenced by various factors such as in-situ stress, geological conditions and excavation methods. In this paper, to investigate the impact of cross-sectional shape, principal stress direction and existing structural planes on the failure mechanism and rockburst process of tunnels, granite samples with horseshoe-shaped holes under different span-ratios and prefabricated cracks are made from the Longmen Mountain Tunnel, corresponding compression tests are carried out in different loading directions. According to the test results, adding the inverted arch and appropriately increasing the span-ratio are beneficial for improving the overall load-bearing performance of the tunnel. However, continuously increasing the flattening rate will lead to an increase in the excavation cross-sectional area, thereby reducing the overall strength of the rock mass. Gradually increasing the flatness of the hard-rock tunnel can effectively improve the stress concentration inside the surrounding rock, significantly reducing the frequency and intensity of rockburst occurrence. For a horseshoe-shaped tunnel with horizontal principal stress direction, the rockburst intensity will intensify, and the location of the occurrence shifts towards the arch bottom and vault. The deformation and failure of deep hard-rock tunnels are often the result of the combined action of tectonic stress and rock mass structural planes, and the existing cracks largely affect and control the fracture evolution process. The effect of prefabricated cracks parallel to compressive stress on granite samples is relatively small, while diagonal-arranged cracks have a significant impact on the failure mechanism of rock mass. If the prefabricated cracks are placed vertically at the haunches with concentrated compressive stress, these planes not only seriously reduce the bearing capacity of the rockmass, but also greatly weaken the strong rockburst disasters. The inclined structural planes lead to significant asymmetry in the failure mechanism and rockburst process of tunnels. Although the intensity of rockburst occurrence has decreased, the frequency of dynamic instability of the surrounding rock may even increase, and the risk of collapse in the upper rock mass will be enhanced.

HYDRAULIC FAILURE MECHANISM OF KARST TUNNEL SURROUNDING ROCK

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Failure mechanism analysis and treatment of tunnels built in karst fissure strata: A case study

Mechanical Response of Surrounding Rock of Karst Tunnel under Stress-Damage-Seepage Coupling Effect

Surrounding rock instability mechanism for fault-crossing tunnels in water-rich soft rock

Water Inrush Mechanism of Fault Zone in Karst Tunnel under Fluid-Solid Coupling Field considering Effective Stress

Failure behavior of horseshoe-shaped tunnel in hard rock under high stress: Phenomenon and mechanisms

Three-dimensional Numerical Modeling of Water Distribution Tunnels in Karst Area

Failure mechanism analysis for tunnel construction crossing the water-rich dense fracture zones: A case study

Hydro-mechanical Coupling Response Behaviors in Tunnel Subjected to a Water-Filled Karst Cave

Influence of Water-Resisting Layer Thickness on Fracture Evolution in Karst Tunnel and Control Measures

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

Deformation and failure characteristics of high-speed tunnels in complex karst areas: a case at the Qilinguan tunnel

Analysis of the Mechanism of Water Inrush Geohazards in Deep-Buried Tunnels under the Complex Geological Environment of Karst Cave-Fractured Zone

Discussion on Surrounding Rock Stress Induced Failure Mechanism in Deep Buried Tunnel

Characteristics and treatment measures of tunnel collapse in fault fracture zone during rainfall: A case study

An analytical model for face stability of tunnels traversing the fault fracture zone with high hydraulic pressure

Study of the disaster-causing mechanism and reinforcement measures for soft rock deformation and lining cracking

Tunnel surrounding rock stability analysis based on geological condition reconstruction and karst development prediction

Experimental Investigation on Failure Mechanism and Rockburst Process of Tunnels Under Different Span-Ratios and Existing Structural Planes

Investigation on the seepage-stress field evolution mechanism and failure process of karst tunnels in water-rich areas