Abstract:Fitting experimentally measured Raman bands with theoretical model profiles is the basic operation for numerical determination of Raman peak parameters. In order to investigate the effects of peak modeling using various algorithms on peak fitting results, the representative Raman bands of mineral crystals, glass, fluids as well as the emission lines from a fluorescent lamp, some of which were measured under ambient light whereas others under elevated pressure and temperature conditions, were fitted using Gaussian, Lorentzian, Gaussian–Lorentzian, Voigtian, Pearson type IV, and beta profiles. From the fitting results of the Raman bands investigated in this study, the fitted peak position, intensity, area and full width at half-maximum (FWHM) values of the measured Raman bands can vary significantly depending upon which peak profile function is used in the fitting, and the most appropriate fitting profile should be selected depending upon the nature of the Raman bands. Specifically, the symmetric Raman bands of mineral crystals and non-aqueous fluids are best fit using Gaussian–Lorentzian or Voigtian profiles, whereas the asymmetric Raman bands are best fit using Pearson type IV profiles. The asymmetric O–H stretching vibrations of H 2 O and the Raman bands of soda–lime glass are best fit using several Gaussian profiles, whereas the emission lines from a florescent light are best fit using beta profiles. Multiple peaks that are not clearly separated can be fit simultaneously, provided the residuals in the fitting of one peak will not affect the fitting of the remaining peaks to a significant degree. Once the resolution of the Raman spectrometer has been properly accounted for, our findings show that the precision in peak position and intensity can be improved significantly by fitting the measured Raman peaks with appropriate profiles. Nevertheless, significant errors in peak position and intensity were still observed in the results from fitting of weak and wide Raman bands having unnormalized intensity/FWHM ratios lower than 200 counts/cm −1 .

Exponential Polynomial Fitting for Fibre Spectrum CCD Profiles

Fiber-based Chromatic Confocal Microscope with Gaussian Fitting Method

Parameter Estimation in Exponential Models by Linear and Nonlinear Fitting Methods.

Effect of spatial spectrum overlap on fourier ptychographic microscopy

Calibration of the fast scan multichannel spectrometer

Deep‐Learned Broadband Encoding Stochastic Filters for Computational Spectroscopic Instruments

Fourier Transform Profilometry Using Zero Frequency Elimination Based on Gray Modulation

Automated background subtraction algorithm for raman spectra based on iterative weighted least squares

Wavefront Modulation with Spatial Light Modulator for Fourier Ptychographic Microscopy

Mapping the aberrations of a wide-field spectrograph using a photonic comb

A Fiber-Based Chromatic Dispersion Probe for Simultaneous Measurement of X-Axis and Z-Axis Displacements with Nanometric Resolutions

Aspherical Surface Profile Fitting Based on the Relationship Between Polynomial and Inner Products

Improved composite Fourier transform profilometry

An on-line phase measuring profilometry: Processed modulation using for pixel matching

Design and Implementation of Data Fitting Algorithm for Brillouin Back Scattered-light Spectrum Data

A General Characterizing Method for Optical Filter Based on Low Coherence Measurement

Applicability of the Focusing Method to Measure the Refractive Index Profile of Polymer Optical Fibers

Linear Least Squares Estimation of Fiber-Longitudinal Optical Power Profile

Detecting Cosmic 21 cm Global Signal Using an Improved Polynomial Fitting Algorithm

An Empirical Study on Raman Peak Fitting and Its Application to Raman Quantitative Research

Fast Simulation and Design of the Fiber Probe with a Fiber-Based Pupil Filter for Optical Coherence Tomography Using the Eigenmode Expansion Approach