Abstract:The current research of the global chassis control problem for the full drive-by-wire vehicle focuses on the control allocation (CA) of the four-wheel-distributed traction/braking/steering systems. However, the path following performance and the handling stability of the vehicle can be enhanced a step further by automatically adjusting the vehicle speed to the optimal value. The optimal solution for the combined longitudinal and lateral motion control (MC) problem is given. First, a new variable step-size spatial transformation method is proposed and utilized in the prediction model to derive the dynamics of the vehicle with respect to the road, such that the tracking errors can be explicitly obtained over the prediction horizon at varying speeds. Second, a nonlinear model predictive control (NMPC) algorithm is introduced to handle the nonlinear coupling between any two directions of the vehicular planar motion and computes the sequence of the optimal motion states for following the desired path. Third, a hierarchical control structure is proposed to separate the motion controller into a NMPC based path planner and a terminal sliding mode control (TSMC) based path follower. As revealed through off-line simulations, the hierarchical methodology brings nearly 1700% improvement in computational efficiency without loss of control performance. Finally, the control algorithm is verified through a hardware in-the-loop simulation system. Double-lane-change (DLC) test results show that by using the optimal predictive controller, the root-mean-square (RMS) values of the lateral deviations and the orientation errors can be reduced by 41% and 30%, respectively, comparing to those by the optimal preview acceleration (OPA) driver model with the non-preview speed-tracking method. Additionally, the average vehicle speed is increased by 0.26 km/h with the peak sideslip angle suppressed to 1.9°. This research proposes a novel motion controller, which provides the full drive-by-wire vehicle with better lane-keeping and collision-avoidance capabilities during autonomous driving.

Optimal preview control driver model with adaptive preview time

Modeling adaptive preview time of driver model for intelligent vehicles based on deep learning

The Study on the Handling and Stability Test of Vehicles Based on ADMS and WTK

Preview Control with Dynamic Constraints for Autonomous Vehicles

Vehicle Path Following Based On Adaptive Double-Layer Driver Model

Research on dynamic constraint mechanism and motion control of intelligent vehicles based on preview distance optimization under complex road conditions

Optimal allocation of tire force based on vehicle stability

Design of an Improved Optimal Preview Lateral Controller

An optimal preview ANN driver model based on error elimination algorithm

Design, Analysis, and Experiments of Preview Path Tracking Control for Autonomous Vehicles.

Comprehensive Lateral Driver Model for Critical Maneuvering Conditions

A Reliable Robust Control Method for Vehicle Lateral Dynamics with Preview Driver Model

Preview Path Tracking Control with Delay Compensation for Autonomous Vehicles

Driver’s Preview Modeling Based on Visual Characteristics through Actual Vehicle Tests

Design of a Path-Tracking Controller with an Adaptive Preview Distance Scheme for Autonomous Vehicles

Game-Theoretic Driver-Automation Cooperative Steering Control on Low-Adhesion Roads With Driver Neuromuscular Delay

Optimal Predictive Control for Path Following of a Full Drive-by-Wire Vehicle at Varying Speeds

Event-triggered model predictive-preview control strategy for trajectory tracking of autonomous vehicle

A simulation study on visual preview control of vehicle magnetorheological suspension

Model-Following Preview Control for a Class of Linear Descriptor Systems with Actuator Failures

Preview-scheduled Steering Assistance Control for Co-Piloting Vehicle: a Human-Like Methodology