Abstract:In this study, an output-only method for extraction of modal macrostrain and damage identification of bridges under ambient excitation is presented. It is theoretically proved that the modal macrostrain within the gauge length of a long-gauge macrostrain sensor is uniquely determined by the peak value of the power spectral density (PSD) of dynamic macrostrain response. Then damage occurred within the gauge length of a sensor can be identified by the ratio change between the peak value of PSD of this sensor response and that of the reference sensor response. The damage extent has also been verified to have corresponding relationship with the ratio change. Numerical simulation was carried out to confirm the feasibility of the proposed method. Analysis results of the numerical simulation reveal that the maximum error of the identified modal macrostrain relative to that of the modal analysis is 3%. Results of simulation show that the proposed PSD-based method can not only accurately localize the damage but also assess the damage extent. The influence of several typical excitations on real bridges was also investigated that further proves the robustness of the method. It is worth mentioning that only the first-order mode is necessary for the method to identify damage. Finally, the proposed method is employed for condition assessment of a real bridge located in New Jersey, wherein 17 long-gauge macrostrain sensors with the gauge length of 1 m were distributedly arranged along the critical region of the girder. Analysis results of the field measurements further verify that the PSD-based method can be utilized to assess the damage state of structures under ambient excitation.

Identification of Modal Macro-Strain Vector Based on Distributed Long-Gage FBG Sensors under Ambient Vibration

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses

Modal Analysis on Macro-strain Measurements from Distributed Long-gage Fiber Optic Sensors

Investigation on the damage identification of bridges using distributed long-gauge dynamic macrostrain response under ambient excitation

A model-free damage identification method for flexural structures using dynamic measurements from distributed long-gage macro-strain sensors

C21 Non-baseline Damage Location Based on Dynamic Macro-Strain Measurements

Quasi-Static Macrostrain-Based Structural Damage Detection With Distributed Long-Gauge Fiber Bragg Grating Sensing

Two-Level Damage Detection Strategy Based on Modal Parameters from Distributed Dynamic Macro-Strain Measurements

Vibration-Based Damage Localization in Flexural Structures Using Normalized Modal Macrostrain Techniques from Limited Measurements

Model-Independent Damage Identification Based On Statistical Correlations Of Dynamic Macro-Strain Distribution

Damage locating based on dynamic measurements from long-gage fiber optic sensors

Modal macro-strain identification from operational macro-strain shape under changing loading conditions

Structural Identification and Damage Detection Through Long-Gauge Strain Measurements

A Non‐baseline Algorithm for Damage Locating in Flexural Structures Using Dynamic Distributed Macro‐strain Responses

A Nonphysics-based Approach for Vibration-based Structural Health Monitoring under Changing Environmental Conditions

Improvement Of Typical Damage Identification Techniques Using Dynamic Strain Distribution From Long-Gage Fbg Sensors

A Model‐free Method for Damage Locating and Quantifying in a Beam‐like Structure Based on Dynamic Distributed Strain Measurements

Modal Strain Energy-Based Model Updating Method for Damage Identification on Beam-Like Structures

Damage Identification Method for Medium- and Small-Span Bridges Based on Macro-Strain Data under Vehicle-Bridge Coupling

Experimental Investigation On Structural Damage Detection Scheme Based On Distributed Fiber Optic Sensors

Modal Macro-Strain Flexibility Methods for Damage Localization in Flexural Structures Using Long-Gage Fbg Sensors