Abstract:To obtain the weaker second harmonic signal of low concentration, reduce the minimum measurable limit and improve the sensitivity and accuracy of absorption measurement, a serious of data processing methods are proposed based on tunable diode laser wavelength modulation spectroscopy. The experiment on lower NH3 concentration at 2.25 μm was carried out in a 10.13 m absorption cell with different concentration. The peak height of the second harmonic signal is maximum at m=2.2, which optimizes the signal-to-noise ratio. In order to guarantee the optimal signal-to-noise ratio, the experiment was carried out by loading the optimal high frequency modulation signal. WMS-2f was performed at a repetitive scan rate of 200 Hz and a current-modulation rate of 15 kHz, wavelength modulation spectroscopy with the optimal signal-to-noise ratio was adopted for its better noise immunity to measure different lower NH3 concentration in the Herriott cell. This survey is focused on the ν2+ν3 bands of absorption spectra near 2.25 μm in near-infrared region at ambient temperature and pressure, the line strengths of 2.25 μm are much larger than the absorption lines in the telecommunication bands, using stronger NH3 absorption lines can offer the potential of lower detection limits. During the data processing, the background signal of the original harmonic should be deducted at first, the second harmonic signal of 0.6×10-6 was obtained in a 10 m long-path Herriott cell after data processing, these signal processing mainly consist of cross-correlation analysis, multiple averages and wavelet transform analysis, the cross-correlation analysis was used to control the shift of center wavelength, the multiple averages and wavelet transform analysis were used to reduce influences of the environment noise, after that we get the revised second harmonic signal and improve the accuracy of the measurement results. The experimental results show that these data processing methods can obviously improve the signal quality and reduce the minimum measurable limit about 100 times lower than before. The experiment doesn’t need to add any laboratory equipment and can well restrain the influence of the environmental noise and other disturbance, so these signal process combined with wavelength modulation technique will be more useful for on-line gas detection technology.

Signal Analytical Processing Based on Wavelet Transform for Tunable Diode Laser Absorption Spectroscopy

Modified laser scanning technique in wavelength modulation spectroscopy for advanced TDLAS gas sensing

Laser Linewidth Analysis and Filtering/Fitting Algorithms for Improved TDLAS-Based Optical Gas Sensor

[Study on CO2 measurement using tunable multi-mode diode laser absorption spectroscopy]

Improvement of the Detection Sensitivity for Tunable Diode Laser Absorption Spectroscopy: A Review

Study on Noise Reduction of Tunable Diode Laser Absorption Spectroscopy Detection Signal Based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise-Detrended Fluctuation Analysis-Wavelet Soft Threshold

Tunable diode laser absorption spectroscopy for detection of multi-component gas: a review

Development and Metrological Characterization of a Tunable Diode Laser Absorption Spectroscopy (TDLAS) Spectrometer for Simultaneous Absolute Measurement of Carbon Dioxide and Water Vapor

Noise Analysis of Second-Harmonic Detection with Tunable Diode Laser Absorption Spectroscopy

THE TUNABLE DIODE LASER ABSORPTION SPECTROSCOPY FOR GAS CONCENTRATION MEASUREMENT

Multiple Gas Detection Using V-cavity Coupled Diode Laser

A tunable diode laser absorption spectroscopy (TDLAS) signal denoising method based on LSTM-DAE

A TDLAS Gas Sensor Using Tunable DFB Laser Array

Highly Sensitive Hydrogen Sensing Based on Tunable Diode Laser Absorption Spectroscopy with a 2.1 μm Diode Laser

Development of a compact tunable diode laser absorption spectroscopy based system for continuous measurements of dissolved carbon dioxide in seawater

Research on a System Noise Simulation and Filtering Method in Tunable Diode Laser Absorption Spectroscopy Technology

Analysis of Calibration-Free Wavelength-Scanned Wavelength Modulation Spectroscopy for Practical Gas Sensing Using Tunable Diode Lasers

Artificial Absorption Creation for More Accurate Tunable Diode Laser Absorption Spectroscopy Measurement

Highly sensitive broadband differential infrared photoacoustic spectroscopy with wavelet denoising algorithm for trace gas detection

Long-Tune Natural Logarithmic Wavelength Modulation Spectroscopy for Gas Sensing

[The Experimental Research on Reducing the Minimum Measureable Limit of Tunable Diode Laser Absorption Spectroscopy with Wavelet Analysis].