Abstract:Measurement and Control, Ahead of Print. In this paper, controller tuning methods based on stability region centroid methods reported in the literature are used to design PI-PD controllers for unstable, integrating and resonant systems with time delay. By analyzing the stability boundary locus (SBL) for the PD controller, which is utilized in the inner loop of this structure, the controller parameters are obtained using three methods which are the Weighted Geometric Center (WGC), Centroid of Convex Stability Region (CCSR), and Stability Triangle Approach (STA). These techniques were applied analytically, step by step. For the closed loop transfer function obtained in the inner loop of the controlled system, these three methods were utilized to design the PI controller in the outer loop, individually. Unit step responses of the controlled system, using PI-PD gains determined by each method, have been obtained. Furthermore, a disturbance of a certain time and amplitude was added to the systems to test the disturbance rejection behavior and the robustness performance of the methods. Perturbed responses were obtained through changing the model parameters at a certain rate. Time domain performance metrics were analyzed to compare the responses. The simulations were evaluated using settling time, rise time, and percentage overshoot as the assessment criteria. As a result of this study, the effectiveness of three methods, namely WGC, CCSR, and STA, in controller design for unstable, integrating, and resonant time-delay systems has been demonstrated. In addition, a comparison of time domain performance metrics is presented for the nominal and perturbed systems. Based on these comparisons, it is concluded that the methods outperform each other only in some time response performance measures. The presented results showed the advantages of these methods over each other in terms of some performance criteria. The contribution of this study to the literature is the comparative analysis of these three analytical methods.

Calculation of PI Controller Stable Region Based on D-partition Method

D-stabilizing controller design for linear interval discrete time-delay systems

Stabilization Subspaces Based DPGA for Optimizing PID Controllers

Guaranteed Cost D-Stabilization And H-Infinity D-Stabilization For Linear Discrete Time-Delay Systems

PI Simultaneous Stabilization and Set-Point Output Regulation of Port-Hamiltonian Systems

A method of parameters tuning of PI~λD~μcontroller based on stability region

Stability Region of Fractional-Order PI Λdμ Controller for Fractional-Order Systems with Time Delay

Computation of Stabilizing PI and PID Controllers by Using Kronecker Summation Method

General stabilization method of fractional-order PI λ D μ controllers for fractional-order systems with time delay

On Stabilizing Sets of PI Controllers for Multiple Time Delayed Process

Robust Digital PI Control for Uncertain Time‐delay Systems in Process Industry

Stabilizing regions of PID controller for a class of unknown nonlinear non‐affine discrete‐time systems

Fractional PID Controller Design Based Regional Pole Index

Predictive PI control and its robust stability analysis

Nominal and robust stability regions of optimization-based PID controllers.

PID Design of Unstable Process by Using Closed Loop Constraints

Regions of robust relative stability for PI controllers and LTI plants with unstructured multiplicative uncertainty: A second-order-based example

A comparative study on PI-PD controller design using stability region centroid methods for unstable, integrating and resonant systems with time delay

Predictive PI(D) Control for High Order Processes with Time-Delay

Stabilization of lti time-delayed processes using analytical pid controllers

A Reduced RLC Impedance Model for Dynamic Stability Analysis of PI-Controller-Based DC Voltage Control of Generic Source-Load Two-Terminal DC Systems