Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

The Characteristic of Stay-Cable Damping System in Consideration of Bridge Deck Vibration

Damping characteristics of PC partial cable-stayed bridge

Estimation of damping matrices of cable-stayed bridges based on known data of modal damping

INVESTIGATION OF DAMPING MATRICES ACCURATE ESTIMATION OF CABLE-STAYED BRIDGES BASED ON NON-PROPORTIONAL DAMPING

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

FEM analysis of vehicle-bridge vibration considering bridge deck's vibration

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Numerical analysis of vehicle-bridge coupling vibration concerning nonlinear stress-dependent damping

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Dynamic Characteristic Research of Cable-Stayed Bridges Considering Cable Local Vibration: Dynamic Behavior Analysis of Northern Channel Bridge in Hangzhou Bay

Numerical Simulation of Vibration Control for Stay Cable Using MR Dampers

Design optimization of Magneto-rheological (MR) dampers for open-loop vibration control of stay cables

Shake Table Test on a Long-Span Cable-Stayed Bridge with Viscous Dampers Considering Wave Passage Effects

A new stay cable dynamic analysis method based on separation of exponential term with free vibration time history

Damping Identification of Mr-Damped Bridge Cables from In-Situ Monitoring under Wind-Rain-Excited Conditions

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method