Revealing the degradation mechanism of the lanthanum nickelates based double‐layer electrodes during long‐term tests in contact with chromium‐containing steel interconnects
Anton A. Solodyankin,Vadim A. Eremin,Maxim V. Ananyev,Ekaterina P. Antonova,Vladislav A. Bulatov,Dmitriy A. Zamyatin,Evgeniy S. Tropin,Natalia M. Porotnikova,Anna V. Khodimchuk
DOI: https://doi.org/10.1002/er.8028
IF: 4.6
2022-05-08
International Journal of Energy Research
Abstract:Long‐term tests for 1000 hours were done for different Membrane‐Electrode‐Interconnect Assemblies, consisting of a steel interconnect and an asymmetrical solid electrochemical cell based on the Ce0.8Sm0.2O2−δ electrolyte, the double‐layer working electrode with the La2NiO4+δ −Ce0.8Sm0.2O2−δ functional layer and the LaNi0.6Fe0.4O3−δ collector layer. A combined electrochemical‐chemical degradation mechanism of the functional layer was revealed: the reduction of CrO3 or CrO2(OH)2 volatile compounds to Cr2O3 followed by the interaction with the La2NiO4+δ to form less active perovskite‐type LaCrO3 oxide on the La2NiO4+δ surface. Summary This paper focuses on the long‐term tests for 1000 hours of different Membrane‐Electrode‐Interconnect Assemblies (MEIAs), consisting of a steel interconnect and an asymmetrical solid electrochemical cell based on the Ce0.8Sm0.2O2−δ electrolyte, the double‐layer working electrode with the La2NiO4+δ – Ce0.8Sm0.2O2−δ composite functional layer and the LaNi0.6Fe0.4O3−δ current collector layer, and the platinum reference electrode (O2, LaNi0.6Fe0.4O3−δ|La2NiO4+δ – Ce0.8Sm0.2O2−δ|Ce0.8Sm0.2O2−δ|Pt, O2). These tests were carried out on MEIAs with two types of Cr‐based stainless steels, Crofer 22 APU and 08X17T, with and without protective coatings at 850°C in air. The electrochemical performance of MEIAs was studied without polarization as well as under cathodic and anodic polarization (current density was 0.5 A cm−2) by means of electrochemical impedance spectroscopy (EIS) and the distribution of relaxation times method (DRT). It was found that the proposed protective coatings for the stainless steels inhibit chromium poisoning without polarization and under anodic polarization: for Crofer 22 APU the degradation of the polarization resistance after ~1100 hours of exposure was 0.35 ± 0.05 Ω cm2, and for 08X17T it was from 0.40 ± 0.05 Ω cm2. In the case of cathodic polarization, the degradation of the polarization resistance remained at a very high level, comparable to uncoated samples: for Crofer 22 APU and 08X17T with coatings, it was about 0.6 to 0.8 Ω cm2 after ~1100 hours. Post‐test analysis of the microstructure and chemical composition of the interconnect ‐ double‐layer electrode interface was carried out using scanning electron microscopy (SEM), wavelength dispersive X‐ray spectrometry (WDS), and respective image analysis of the obtained data. The influence of chromium poisoning on the degradation was considered for different stages of the electrode performance. It was demonstrated that chromium predominantly accumulates in the current collector layer in the case of anodic polarization and in the functional layer in the cases of open circuit and cathodic polarization. For the first time, a combined electrochemical‐chemical degradation mechanism of the La2NiO4+δ – Ce0.8Sm0.2O2−δ functional layer was discussed. Highlights Long‐term tests of Membrane‐Electrode‐Inteconnect Assembles (MEIAs) were done. Chromium poisoning was detected on MEIAs with the interconnects without coating. Cathodic polarization terminates the protective properties of the coatings. Chromium poisoning decreases electrode activity to oxygen exchange and diffusivity. A combined electrochemical‐chemical degradation mechanism of the functional layer was revealed.
energy & fuels,nuclear science & technology