Abstract:The introduction of carbon nanotubes in a polymer matrix can markedly improve its mechanical properties and electrical conductivity, and much effort has been devoted to achieve homogeneous dispersions of carbon nanotubes in various polymers. Our group previously performed successfully fluorine-grafted modification on the sidewalls of multi-walled carbon nanotubes (MWCNTs), using homemade equipment for CF4 plasma irradiation. As a continuation of our previous work, in the present study CF4 plasma-treated MWCNTs (F-MWCNTs) were used as a nanofiller with poly(ethylene terephthalate) (PET), which is a practical example of the application of such F-MWCNTs to prepare polyester/MWCNTs nanocomposites with ideal nanoscale structure and excellent properties. As confirmed from scanning electron microscopy observations, the F-MWCNTs could easily be homogeneously dispersed in the PET matrix during the in situ polymerization preparation process. It was found that a very low content of F-MWCNTs dramatically altered the crystallization behavior and mechanical properties of the nanocomposites. For example, a 15 degrees C increase in crystallization temperature was achieved by adding only 0.01 wt% F-MWCNTs, implying that the well-dispersed F-MWCNTs act as highly effective nucleating agents to initiate PET crystallization at high temperature. Meanwhile, an abnormal phenomenon was found in that the melt point of the nanocomposites is lower than that of the pure PET. The mechanism of the tailoring of the properties of PET resin by incorporation of F-MWCNTs is discussed, based on structure-property relationships. The good dispersion of the F-MWCNTs and strong interfacial interaction between matrix and nanofiller are responsible for the improvement in mechanical properties and high nucleating efficiency. The abnormal melting behavior is attributed to the recrystallization transition of PET occurring at the early stage of crystal melting being retarded on incorporation of F-MWCNTs. (C) 2009 Society of Chemical Industry

Surface Modification of Carbon Nanotube and Its Influence on the Conductivity Property of Carbon Nanotube/fluoro-Elastomer Composite

Effect of CNT Modification on Morphology and Interface of CNT/Fluoro Elastomer (FE) Nanocomposite

Effects Of Corona Discharge On The Surface Structure, Morphology And Properties Of Multi-Walled Carbon Nanotubes

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

Characterization of Electrical Conductivity of Carbon Nanotube Composites

Effect of Acid Modification on Electrical Properties of Carbon Nanotube/epoxy Resin Composites

Effects of Surface Modification of Carbon Nanotubes on the Microstructure and Electrical Properties of Carbon Nanotubes/rubber Nanocomposites

Synergistic effect of surface modification of carbon fabrics and multiwall carbon nanotube incorporation for improving tribological properties of carbon fabrics/resin composites

Effects of Mixed Acid Functionalization on Electric Conductance Properties of Carbon Nanotube/Epoxy Resin Composite

Improving thermal, electrical and mechanical properties of fluoroelastomer/amino-functionalized multi-walled carbon nanotube composites by constructing dual crosslinking networks

Effects of Carbon Nanotubes Grafted on a Carbon Fiber Surface on Their Interfacial Properties with the Matrix in Composites

Plasma Treatment‐induced Fluorine‐functionalized Multi‐walled Carbon Nanotubes to Modify Poly(ethylene Terephthalate) Obtained Via in Situ Polymerization

Fluoro-polymer-coated carbon nanotubes for improved interfacial interactions and dielectric properties in MWCNTs/PVDF composites

Surface Modification of Carbon Nanotubes and Their Application in Polymers

Surface Modification and Application of Multi-Walled Carbon Nanotubes in Fire-Retardant Coatings

Mechanical and surface properties of polyurethane/fluorinated multi-walled carbon nanotubes composites

Interfacial Properties Improvement of Carbon Fiber Reinforced Epoxy Composites Modified with Carbon Nanotubes

Electrical and thermal characteristics of MWCNTs modified carbon fiber/epoxy composite films

Influence of Surface Chemical Groups and Content of Carbon Nanotubes on Electrical Property of Epoxy Resin Composites

Surface Functionalization-of Carbon Nanotubes:Grafted from Epoxy-Terminated Molecule