Abstract:Nafion, the state-of-the-art-of proton exchange membrane in fuel cell, is a copolymer with a randomly tethered side-chain terminated by a pendant sulfonic acid groups adjacent to the polytetrafluoroethylene (PTFE) backbone. The PTFE backbone is hydrophobic and insulative, whereas the sulfonic acid groups are hydrophilic and proton-conductive. As a result of the intrinsic difference between the backbone and sulfonic acid groups, phase separation occurs during the formation of solid Nafion membranes from ionomer solution via a self-organizing process conducted at elevated temperature. The ionic clusters are formed in hydrophobic matrix by hydrophilic groups, interconnected by slender ionic channels which serve as the proton conductive pathways. Furthermore, the distribution of proton-conductive pathways not only inside but on the surface of the membrane plays a significant role in improving the cell performance. The latter determines the mass transport of H 2 O molecules and protons through the membrane, which is the basis of good performance in fuel cells. In addition, the three-phase boundary (TPB) plays a crucial role in the performance of fuel cells, which means that the electrocatalysts (such as Pt) in fuel cells must directly contact with the conductive hydrophilic regions on the surface of PEMs to minimize the contact resistance and invalid catalysts located in the hydrophobic regions will lead to lower catalyst utilization. However, an excess of hydrophilic groups would cause flooding, and the hydrophobic phase is necessary for supporting mechanical strength and separating reagents in fuel cells. Therefore, in order to further promote fuel cell performance, detailed knowledge of phase separation with Nafion is required, and a good balance between the distributions of hydrophilic and hydrophobic groups is extremely crucial for promising ion exchange membranes. Currently, current-sensing AFM is often used to obtain the imaging of local surface proton conductance. However, the direct current (DC) applied leads to an overall result that is affected by many factors, such as proton conductivity, mass transport and reaction kinetics. Compared to DC methods, alternate current (AC) methods such as electrochemical impedance spectroscopy (EIS) provides a powerful insight to the overall impedance response and individual processes including ionic transport can be distinguished at higher accuracy. In our study, we constructed a home-built AFM-EIS setup and measured the localized impedance by coupling AFM with an impedance tester in a Faraday cage. In contrast to traditional average and macroscopic bulk impedance measurements, we obtained a detailed and spatially diverse distribution of EIS spectra at selected points on Nafion with AFM-EIS. By equivalent electric circuit fitting, we derived the localized pure proton transfer resistance from the EIS spectra; such results cannot be obtained by current-sensing AFM. In addition, with a customized automatic procedure, we performed proton transfer resistance imaging on the Nafion surface in an area of 2 µm*2 µm at different humidities, the results of which confirmed the widely known fact that higher water activities significantly reduce the transport resistance. However, our experimental results show a wide variation in proton transport resistance at a well-equilibrated humidity level of the membrane. Our work has led to the conclusion that the large variation arises mainly from the surface concentration of water channels due to the fact that the transport and reaction kinetics are favoured by the three-phase interface. Furthermore, to elucidate the Nafion microstructure, a numerical simulation was constructed to incorporate morphological and physical variations of the membrane, such as the heterogeneity of the hydrophilic and hydrophobic groups in the membrane, which revealed that at higher water activities, SO 3 H groups cluster to create a matrix of interconnected nano-water channels through which the ions are transported. Figure 1

Analyses Of Interfacial Resistances In A Membrane-Electrode Assembly For A Proton Exchange Membrane Fuel Cell Using Symmetrical Impedance Spectroscopy

Localized Electrochemical Impedance Measurements on Nafion Membranes: Observation and Analysis of Spatially Diverse Proton Transport Using Atomic Force Microscopy

A Novel Approach to Fabricate Membrane Electrode Assembly by Directly Coating the Nafion Ionomer on Catalyst Layers for Proton-Exchange Membrane Fuel Cells

Mesoscopic Modeling of Transport Resistances in a Polymer-Electrolyte Fuel-Cell Catalyst Layer: Analysis of Hydrogen Limiting Currents

Synergistic analysis of oxygen transport resistance in polymer electrolyte membrane fuel cells

Numerical analysis of catalyst agglomerates and liquid water transport in proton exchange membrane fuel cells

Mesoscopic Analyses of the Impact of Morphology and Operating Conditions on the Transport Resistances in a Proton-Exchange-membrane Fuel-Cell Catalyst Layer

An Asymmetric Membrane Electrode Assembly for High-Performance Proton Exchange Membrane Fuel Cells

Ionomer Distribution Control for Improving the Performance of Proton Exchange Membrane Fuel Cells: Insights into Structure–property Relationships

Optimization of Membrane Electrode Assembly of PEM Fuel Cell by Response Surface Method

Analysis of Multiphase Transport Phenomena in Pemfcs by Incorporating Microscopic Model for Catalyst Layer Structures

Investigation of membranes-electrodes assemblies in anion exchange membrane fuel cells (AEMFCs): Influence of ionomer ratio in catalyst layers

Structural and Transport Properties of Hydrophilic and Hydrophobic Modified Ionomers in Proton Exchange Membrane Fuel Cells

Modeling Analysis of Polymer Electrolyte Membrane Fuel Cell with Regard to Oxygen and Charge Transport under Operating Conditions and Hydrophobic Porous Electrode Designs

Numerical Analyses on Oxygen Transport Resistances in Polymer Electrolyte Membrane Fuel Cells Using a Novel Agglomerate Model

Proton Transport, Electroosmotic Drag and Oxygen Permeation in Polytetrafluoroethylene Reinforced Ionomer Membranes and Their Effects on Fuel Cell Performance

Ionomer Segregation in Composite MEAs and Its Effect on Polymer Electrolyte Fuel Cell Performance

(Digital Presentation) Diagnostic Study of the Key Performance-Limiting Factors in Anion Exchange Membrane Fuel Cells

Composition and evaluation of single-layer electrode proton exchange membrane fuel cells for mass transfer analysis

Unveiling the resistance component on fuel cell electrodes by ionic liquid adsorbed PtCo/C catalyst through distribution of relaxation time

Reinforced Integrated Membrane Electrode Assembly Based on Ionomer Wet-Binding and Eptfe Reinforcement Strategy for Proton Exchange Membrane Fuel Cells