Abstract:In this study, we present the use of a Ni-Cu alloy electrodeposited on a titanium electrode as a sensor for non-enzymatic glucose oxidation. Electrochemical parameters such as bath composition, potential, and deposition times used to obtain the films were studied. After optimization of operating conditions, the morphology, chemical composition, and surface structure of the Ni-Cu alloy electrodes were characterized using scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) and X-ray diffraction spectroscopy (XRD). Electrocatalytic activity of the modified Ni-Cu electrodes towards non-enzymatic glucose oxidation was then evaluated by cyclic voltammetry and chronoamperometric and impedance spectroscopy. The experimental impedance data were fitted with an equivalent circuit model representing the electrode/electrolyte interface, to evaluate the charge transfer rate as well as the electrical characteristics of the catalytic surface. Cyclic voltammetry experiments show that the Ni-Cu films prepared at − 0.975 V for 10 min significantly generated the highest oxidation current, extended linear responses for glucose concentrations in the range of 0.25 to 8 mM, with excellent values of the limit of detection (LOD, 4.97 μM) and sensitivity ( 546 μA mM −1 cm −2 ). Effects of endogenous interfering species (ascorbic acid (AA), uric acid (UA), oxalic acid, fructose, sucrose, NaCl, and KNO 3 ) on the electrocatalytic response of Ni-Cu/Ti were also studied and showed that Ni-Cu/Ti is a selective electrocatalyst towards glucose oxidation. The application of Ni-Cu/Ti biosensor in real human saliva and urine samples is demonstrated using chronoamperometric detection: the increase in current remains proportional to successive additions of glucose. Finally, it was shown that the Cu-Ni/Ti sensor presented the lowest charge transfer resistance ( R ct ) and the highest double layer capacitance values compared to those of the pure Ti, Ni/Ti, and Cu/Ti electrodes. The improved electrocatalytic activity is mainly attributed by the synergistic effect between Ni and Cu.

Dendritic Bimetallic Nanostructures Supported on Self-Assembled Titanate Films for Sensor Application

Embedment of Well Dispersed Nickel Nanoparticles in Sulfonate and Benzimidazole Functionalized Poly (arylene Ether Ketone) Film for the Electrocatalytic Oxidation of Glucose

Formation of PtCuCo Trimetallic Nanostructures with Enhanced Catalytic and Enzyme-like Activities for Biodetection

A CuNi/C Nanosheet Array Based on a Metal–Organic Framework Derivate As a Supersensitive Non-Enzymatic Glucose Sensor

Facile Synthesis of Ultrathin Nickel-Cobalt Phosphate 2D Nanosheets with Enhanced Electrocatalytic Activity for Glucose Oxidation.

Ni/CdS bifunctional Ti@TiO2 core-shell nanowire electrode for high-performance nonenzymatic glucose sensing.

Preparation of Amorphous Ni/Co Bimetallic Nanoparticles to Enhance the Electrochemical Sensing of Glucose

Facile synthesis of 2D/3D hierarchical NiCu bimetallic MOF for non-enzymatic glucose sensor

Electrochemical synthesis of shape‐controlled Cu‐Ni nanocomposite and its application for nonenzymatic glucose sensing at nanomolar level

Partially Oxidized Carbon Nanomaterials with Ni/NiO Heterostructures As Durable Glucose Sensors

Electrodeposition of Ni-Cu alloy electrodes in sulfate–citrate medium and their use for non-enzymatic glucose oxidation

A highly sensitive non-enzymatic glucose sensor based on CuNi nanoalloys through one-step electrodeposition strategy

Ni nanoparticles decorated titania nanotube arrays as efficient nonenzymatic glucose sensor

3D NiCo-Layered double Hydroxide@Ni nanotube networks as integrated free-standing electrodes for nonenzymatic glucose sensing

Nickel/Copper Nanoparticles Modified TiO2 Nanotubes for Non-Enzymatic Glucose Biosensors

Mixed Ni-Cu-oxide nanowire array on conductive substrate and its application as enzyme-free glucose sensor

Programming a triple-shelled CuS@Ni(OH) 2 @CuS heterogeneous nanocage as robust electrocatalysts enabling long-term highly sensitive glucose detection

Exploiting Synergistic Interaction in Cu-Zn-Ni Alloy Oxide Films Prepared by One-Step Anodizing for a Highly Sensitive Non-Enzymatic Glucose Sensor

Muti-Component Nanocomposite of Nickel and Manganese Oxides with Enhanced Stability and Catalytic Performance for Non-Enzymatic Glucose Sensors

Atomic-scale Interfacial Engineering Enables High-Performance Electrochemical Glucose Detection

Facile Synthesis of CuCo2O4@NiCo2O4 Hybrid Nanowire Arrays on Carbon Cloth for a Multicomponent Non-Enzymatic Glucose Sensor