Abstract:Considering the inherent advantages of the Light Emitting Diode (LED) in the field of illumination, this work designs an intelligent supplementary lighting system using LED as the light source. Combining microcontroller and electronic circuit theory, the circuit is built with the microcontroller PIC16F873 as the core control chip. The system utilizes an external 220 V AC-20 V DC conversion power supply, hence operating on a 20 V DC power source. The system consists of four hardware parts: the onboard power supply uses TI-produced TPS54331 as the control chip to achieve voltage conversion; the external signals (flashing and burst flashing signals) are isolated from the microcontroller through an optocoupler circuit; the PWM pulses output from the microcontroller’s RC1/CCP2 pins drive the corresponding switching tubes to achieve the flashing function; the flashing synchronization signal is output externally after optocoupler isolation, and its synchronous output with the flashing signal is achieved through an optocoupler after LED conduction; the circuit is established using TI-produced differential bus transceiver SN65LBC184D to convert the external 485 differential signal to the level signal required by the microcontroller. In the experiment, after completing the hardware design, connecting the LED panel, and debugging the test program, it is found that the designed lighting system has a good supplementary lighting effect. According to the PWM output waveform, the flashing effect meets the design expectations. The Hadoop big data computing platform is introduced. Simulation testing reveals that under no backlight conditions, the system achieves an illumination intensity of around 20 klx at a distance of about 10 meters. With backlight conditions, the system maintains an illumination intensity of around 1.5 klx at a distance of about 10 meters. Further calculations are performed to analyze the variation in foot traffic within the test area’s illumination over 24 hours. The total illumination intensity during different time intervals is compiled, confirming that the system can autonomously adjust the illumination intensity of the area based on changes in foot traffic.

[Study of LED Chip Spectrum Acquisition System Based on CPLD].

Stray light errors in spectral colour measurement and two rejection methods

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Spectrum measurement for LED-based spectrum-tunable source

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Implement of Multiple Pulse Position Modulation with CPLD

Research on illumination measurement system by segmented calibration based on MCU

Top-Emitting Microcavity Light-Emitting Diodes Based on All-Thermally Evaporated Lead-Free Copper Halide Self-Trapped-Exciton Emitters

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

Photoelectrical Encoder System Based on CPLD

Application of CPLD in the No-contact Displacement Measurement System

Design Method of General-Purpose Driving Circuit for CCD Based on CPLD

Design of Optocoupler for Synthesizing Four Color Spectra

The Design of the Synchronization Control Circuit Based on Cpld for the Range-Gated Laser Imaging System

Study on a Spectrophotometer System for Measuring LED's Photometric Parameters

Application of CPLD in the Industrial CT System

Research on Data Acquisition System for CZT Detector Based SPRD

A New Synchronization Control Circuit Based on CPLD for the Laser Range-gated Imaging System

Intelligent Light Emitting Diode Flashing Supplementary Lighting Control Design and Its Big Data Illumination Analysis

A Deep Learning-Aided Remote Spectrally Tunable LED Light Source Integrated System

Rapid time-resolved Circular Polarization Luminescence (CPL) emission spectroscopy