Abstract:When a flaw is detected in austenitic piping during in-service inspection, the limit load criterion given in the codes such as JSME Rules on Fitness-for-Service for Nuclear Power Plants or ASME Boiler and Pressure Vessel Code Section XI can be applied to evaluate the structural integrity of the piping. Considering that a cracked pipe is subjected to tensile load and/or bending moment, limit load (moment) for ductile material can be well predicted based on the net-section-collapse criterion derived from the equilibrium of the admissible stress distribution on the ligament of the cracked section. Actual piping is generally subjected to combined tensile, bending, and torsional loadings, however, a methodology to evaluate limit moment for torsion is not established due to the inadequacy of experimental validation. In this study, fracture tests for circumferentially cracked cylinders subjected to torsional moment were conducted. Tested material was austenitic stainless steel, and the shape and size of crack were variable. Experimental maximum moments were compared with the limit moments, which were evaluated based on the concept of the net-section-collapse criterion for torsional moment. The maximum moments could be conservatively predicted by the net-section-collapse criterion. In addition, an innovative test method was developed to conduct torsional tests using a pair of Charpy V-notch specimens and a conventional test machine. The adequacy of the replacement of cracks with machined notches for ductile materials under torsional loading was investigated through the comparison of the fracture behavior obtained from notched and precracked Charpy specimens. The developed method could be an alternative test method for torsional moment.

Crack predicting in multi-way loading forming process of AISI-5140 tee-joint valve

Simulation Analysis of Forming Parameter Effect on Cross Valve Multi-Way Loading Process

Coupled thermal-mechanical FEM analysis on multi-way loading forming process of triple valve body

Analysis of laminated crack defect in the upsetting process of heavy disk-shaped forgings

Damage and Cracking Prediction of AISI 410 Martensitic Stainless Steel at Elevated Temperatures

Multi-scale simulation for the forming of a heavy vessel head considering the evolution of defects and microstructure

Model for predicting ductile fracture of SA508-3 steel undergoing hot forming

ICONE19-43138 Prediction of Failure Bending Moment for a Pipe Containing Multiple Circumferential Cracks with Complex Shapes

Assessment of process-induced cracks in hot-working operations using crack susceptibility index based on plastic instability criteria

Prediction of ductile cracking in the titanium alloy forging process

Prediction of forming limit in the hydroforming processes by using FEM and fracture criterion

Analysis of deformation characteristic in multi-way loading forming process of aluminum alloy cross valve based on finite element model

Fatigue life prediction for Q420qFNH weathering steel welded joints considering the effect of multiple cracks

Stamping Failure Analysis of Advanced High Strength Steel Sheet Based on Non-Uniform Local Deformation Through Thickness

Plastic Limit Load Analysis of Tee Joint Containing Corner Cracks

Multi-axial Creep-Fatigue Analysis of a Cracked Groove Structure Subjected to Cyclic Thermal Loading

Finite Element Simulation of Aluminum Alloy Cross Valve Forming by Multi-Way Loading

Quantitative Assessment of Microstructural Damage for Interior Crack Initiation and High Cycle Fatigue Life Modeling

ICONE19-43356 NET-SECTION-COLLAPSE OF CIRCUMFERENTIALLY CRACKED CYLINDERS SUBJECTED TO TORSIONAL MOMENT

Damage Evolution Mechanism of Railway Wagon Bogie Adapter 1035 Steel and Damage Parameter Calibration Based on Gursone–Tvergaarde–Needleman Model

Ductile Fracture Prediction Based on J-integral and Unified Constraint Parameters for Cracked Pipes