Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. High-strength steel materials play a crucial role in improving automotive crash safety and reducing vehicle weight. However, the high hardness and strength characteristics of high-strength steel make it challenging to be joined by the conventional self-piercing riveting (C-SPR) process. In this study, the C-SPR and pre-holed self-piercing riveting (PH-SPR) processes are employed to join high-strength steel DP590 and aluminum alloy AlSi10MnMg-T7 sheets. The forming quality, microstructure, mechanical properties, and failure behavior of the PH-SPR joint are investigated and compared with the C-SPR joint. The effects of rivet strength, rivet length, sheet thickness, and sheet material on the forming quality of the two types of joints are compared systematically and numerically. The results show that the forming quality of the PH-SPR is sensitive to rivet parameters while not to the material of the top sheet. The rivet with lower strength and larger length can improve the forming quality of PH-SPR joints. the PH-SPR process reduces the riveting force and energy consumption by 12.1% and 46.3%, respectively, compared with the C-SPR process. The presence of the top steel sheet in C-SPR joint brings an increasing hardness of both the rivet leg and aluminum sheet during the riveting process. The mechanical responses of the PH-SPR joint are superior to those of the C-SPR joint. Specifically, the peak force of the C-SPR joint is 4.8% lower than that of the PH-SPR joint, while the energy absorption of the PH-SPR joint is 3.18 times higher than that of the C-SPR joint.

Quality Analysis of Electromagnetic Riveting Sample

Influence of the Deformation of Riveting-Side Working Head on Riveting Quality

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Effect of rivet shaft length on joining in electromagnetic riveting

Study on Analysis and Prediction of Riveting Assembly Variation of Aircraft Fuselage Panel

Microstructure Investigation and Mechanical Property Analysis in Electromagnetic Riveting

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Electromagnetic Riveting Experiments of Φ8mm 2A10 Aluminum Alloys Rivet

Local-global Method to Predict Distortion of Aircraft Panel Caused in Automated Riveting Process

Effect of punch type on microstructure and mechanical properties of aluminum alloy structures prepared by electromagnetic riveting

Effect of Deformation Degree on Rivet Microstructure in Electromagnetic Riveting

Experimental evaluation on mechanical properties of a riveted structure with electromagnetic riveting

Experimental Investigation on Feasibility of Substituting Large Diameter Riveting for Bolting

Multi-filed Coupling Numerical Simulation and Experimental Investigation in Electromagnetic Riveting

Simulation and Analysis of Self-Piercing Riveting Process in Aluminum Sheets

Numerical Simulation and Experimental Investigations on TA1 Titanium Alloy Rivet in Electromagnetic Riveting

Effects of Loading Rate on TA1 Rivet Deformation in Electromagnetic Riveting

Numerical Simulation and Experiment of Self-Piercing Riveting with Solid Rivet Joining Multi-Layer Aluminum Sheets

Investigation of Joint Quality 980 MPa Grade GA Steel Sheet and 5052 Aluminum Alloy by Electromagnetic Self-Piercing Riveting

Failure Analysis on the Rivet

A comparative study on self-piercing riveting and pre-holed self-piercing riveting of high-strength steel and aluminum alloy