Abstract:Phosphogypsum (PG) is a solid waste generated during the wet production of phosphoric acid, noted for causing significant environmental pollution due to low pH and contamination with phosphorus-fluorine impurities. This work proposes an innovative method of acid treatment to acidify PG by directly adding of sulfuric acid at suitable temperatures. Initially, this acid treatment process is employed to convert and remove phosphorus-fluorine impurities, followed by PG after acid treatment incorporation with lime for safe solidification. The conversion mechanisms of phosphorus-fluorine impurities during acidification and solidification are elucidated. Results demonstrate that the direct acidification method converts most fluoride into H 2 SiF 6 and HF, which are subsequently released from the PG system after a temperature of 175 °C treatment. Phosphorus is wholly transformed into water-soluble forms (H 3 PO 4 /H 2 PO 4 - /HPO 4 2- ), especially as eutectic phosphorus is released and converted when CaSO 4 ·2 H 2 O crystals dissolve to II-CaSO 4 . Following acidification to achieve a high water-soluble phosphorus/fluorine ratio, lime is added to convert phosphorus-fluorine impurities into Ca 5 (PO 4 ) 3 F, ensuring harmlessness. The addition of 3.7 % lime to acidified PG, an acid amount of 2-times the theoretical requirement, yields a treatment solution with pH=8.65, ρ(P)=0.05 mg/L and ρ(F - )=1.11 mg/L, meeting Class V water discharge standards (GB 3838–2002). The solidified PG filter residue contains the water–soluble ω(P 2 O 5 ) ≤ 0.01 % and ω(F - ) ≤ 0.0061 %, suitable for safe storage. This work indicates that this process can separate phosphorus impurities with lower energy consumption, providing a harmless PG treatment. Furthermore, the treated PG can hydrate to gain strength, potentially enhancing its utility as a resource.

Research Progress in Production of Sulfuric Acid from Phosphogypsum

Technology and engineering progress of sulfuric acid production by phosphogypsum decomposition with sulfur

Thermodynamic Study of Phosphogypsum Decomposition by Sulfur

Research Progress of Phosphate Resource Processing:7.Research Progress of SA and Sulfate Produced from Phosphogypsum

Analysis on New Approaches for Utilization of Phosphogypsum in China

Thermodynamic Analysis of the New Process for Sulfuric Acid Production from Phosphogypsum

Effect of Coal Ash on the Reduction and Roasting Processes of Phosphogypsum

Copper Slag Assisted Coke Reduction of Phosphogypsum for Sulphur Dioxide Preparation

Preparation of sulfuric acid from phosphogypsum by ammonium-transferred method:Technical principle and process evaluation

New way of treatment of phosphogypsum by chemical method

Effect of reacting atmosphere and additives on reaction process for production of sulfuric acid from phosphogypsum

Resource utilization of solid-phase by-product sulfate from industry production

Preparation of Calcium Sulfide by Sludge‐assisted Rice Husk Reduction of Phosphogypsum

Preparation of Sulfur Dioxide by Divalent Iron Synergistic Coke Reduction of Phosphogypsum in a Fluidized Bed

Experimental Study of CaS Preparation from Lignite‐reduced Phosphogypsum in a Fluidized Bed

New technology of vibration fluidization decomposition process for producing sulfuric acid and cement with phosphogypsum

Phosphogypsum as a raw material for the production of SO2 and lime in circulating fluidized beds

Enhanced absorption of SO 2 from phosphogypsum decomposition by phosphate slurry for phosphoric acid production

Preparation of Calcium Oxide by Decomposition of Phosphogypsum under CO and Water Vapor Atmosphere

Study of Semi-Dry High Target Solidification/Stabilization of Harmful Impurities in Phosphogypsum by Modification

Research on the technology and mechanism of direct acidification of phosphogypsum and deeply solidify impurities with lime