Upgrading Bio-Oil Through Emulsification with Biodiesel: Mixture Production

Xiaoxiang Jiang,Naoko Ellis

DOI: https://doi.org/10.1021/ef9010669

IF: 4.6541

2009-01-01

Energy & Fuels

Abstract:There has been increasing interest in alternative fuels made from biomass, which is abundant and renewable. Bio-oil produced by foist pyrolysis of biomass is highly viscous and acidic and has a high water content. To overcome these problems as a fuel, a method of emulsifying bio-oil with biodiesel has been investigated. In the present Study, various effects oil the mixture stability have been examined. The optimal conditions for obtaining a stable mixture between bio-oil and biodiesel are with an octanol surfactant dosage of 4% by volume, initial bio-oil/biodiesel ratio of 4:6 by volume, stirring intensity of 1200 rpm, mixing time of 15 min, and emulsifying temperature at 30 degrees C. Furthermore, selected fuel properties, such as viscosity, density, water content, acid number, and average molecular weight, are measured for Characterizing the bio-oil/biodiesel mixture. Thermogravimetric analysis (TGA) has been used to further evaluate the thermal properties. Data from the TGA and Fourier transform infrared (FTIR) analyses confirm the presence or absence of a certain group of chemical compounds in the mixture. The kinetic parameters for the thermal decomposition of the bio-oil, bio-oil/biodiesel-rich phase, and pyrolytic lignin-rich phase were obtained from the TGA experiments.