Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Adaptive hybrid force/position control for an industrial robot: theory and experiments

Adaptive Control of Vertical Stage of A Robot Arm for Wafer Handling

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

Smooth adaptive hybrid impedance control for robotic contact force tracking in dynamic environments

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Coupled Force–Position Control for Dynamic Contact Force Tracking in Uncertain Environment

Intelligent robot deburring using adaptive fuzzy hybrid position/force control

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

Hybrid force/position control in workspace of robotic manipulator in uncertain environments based on adaptive fuzzy control

Adaptive fractional-order admittance control for force tracking in highly dynamic unknown environments

Task-Oriented Adaptive Position/Force Control for Robotic Systems Under Hybrid Constraints

Accurate Dynamic Modeling and Control Parameters Design of an Industrial Hybrid Spray-Painting Robot

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Desired compensation adaptive robust repetitive control of a multi-DoFs industrial robot

Adaptive Force Controller for Contact-Rich Robotic Systems using an Unscented Kalman Filter

Analysis and design of hybrid position/force control of robotic arm

Active Admittance Control with Iterative Learning for General-Purpose Contact-Rich Manipulation

A systematic design procedure of force controllers for industrial robots

Hybrid force/position control for a 3-DOF 1T2R parallel robot: Implementation, simulations and experiments

Dynamic Adaptive Hybrid Impedance Control for Dynamic Contact Force Tracking in Uncertain Environments