Abstract:The mechanical behaviors of rockfills exhibit strain-softening and dilative features, which is also influenced by the pressure, loading paths and density. In this paper, a new fractional sub-loading surface model for rockfills is proposed based on the critical state mechanism, which is a typical double yield surfaces model. In the p-q plane, the current and reference stress points are located on the sub-loading surface and the reference yield surface, respectively. The relative position between the sub-loading surface and reference yield surface is controlled by the void ratio difference rho. Compared with the state parameter psi, rho is able to account for the effect of loading paths additionally. The proposed model is able to account for the extent between the plastic flow direction and the loading direction without introducing a plastic potential function. A fractional plastic flow rule is developed by applying the Caputo fractional stress operator on the yield function, which provides a unified description for the associated and non-associated plastic flow rules. The formula of the proposed model is quite simple and the included seven model parameters can be determined through laboratory tests conveniently. The model predictions were compared with the drained triaxial test results of Tacheng rockfill under the conditions of various initial void ratios and confining pressures. A good agreement between the model predictions and experimental results is obtained, which indicates that the proposed model is capable of describing the stress-strain curves and deformation features of Tacheng rockfill. In addition, the effect of initial void ratios on the critical state line in the e-lnp plane is also captured by the proposed model.

A Strain Hardening Model for Rockfills

A Strain Hardening Model for the Stress-Path-dependent Shear Behavior of Rockfills

Numerical Simulation of the Shear Behavior of Rockfills

An experimental investigation and mechanical modeling of the combined action of confining stress and plastic strain in a rock mass

Model for dynamic residual strain behavior of rockfill materials

An elastoplastic constitutive model for rockfills incorporating energy dissipation of nonlinear friction and particle breakage

A Small Strain Constitutive Model Based on Hardening Soil Model

State-Dependent Constitutive Model for Rockfill Materials

Dilatancy Equation of Rockfill Material under the True Triaxial Stress Condition

Study on Elasto-Plastic Constitutive Model of Rockfills with Nonlinear Strength Characteristics

A hardening/softening elasto-plastic constitutive model for soils

Modeling and Behaviours of Rockfill Materials in Three-Dimensional Stress Space

A Rheological Model to Simulate the Shear Creep Behavior of Rockfills Considering the Influence of Stress States

An Improved Hypoplastic Constitutive Model of Rockfill Considering Effect of Stress Path

A fractional sub-loading surface model for rockfill

Modified Anisotropic Generalized Plasticity Model for Rockfills Based on Spatial Mobilized Plane

Explicit Integration and Implementation of State-Dependent Constitutive Model for Rockfill Materials

Bounding Surface Model for Rockfill Materials Dependent on Density and Pressure under Triaxial Stress Conditions

Comparison and Verification of Constitutive Models for Rockfill Materials under Complex Stress Path

Research on Strength-Deformation Characteristics and Nonlinear Elastic Model of Rockfills

A STRAIN HARDENING MODEL REFLECTING STRESS PATH CORRELATION OF CORASE-GRAINED MATERIALS