Abstract:Municipal solid waste circulating fluidized bed incineration (MSWCFBI) fly ash was a hazardous waste, maintaining challenges for disposal. One effective approach was stabilizing the toxic heavy metal ions in the fly ash structures in situ. This work proposed a fusion–hydrothermal method, including fusion pretreatment in nitrogen atmosphere and microwave-assisted hydrothermal process, to treat three MSWCFBI fly ash samples. Specifically, leaching tests were performed to demonstrate the heavy metal stabilization. Through the treatment of the fusion–hydrothermal process, the concentrations of Cd, Cu, Zn, Pb, Ni, and Cr ions leaching from the fly ashes were obviously less than those of the raw fly ash and the sample only treated by hydrothermal process. Meanwhile, the heavy metal ions migrating from the fly ash to the hydrothermal residual liquid were reduced. Importantly, lots of zeolites formed during the fusion–hydrothermal process, such as to bermorite and sodalite. The fusion pretreatment significantly facilitated the conversion of quartz into amorphous silicon and silicate salts. Then, the silicon dissolution was accelerated and zeolite formation was promoted. Eventually, the heavy metal ions could be trapped in zeolite frameworks, enhancing the stabilization of heavy metal. Moreover, the cation-exchange capability values of the three treated fly ash were 1.099, 1.168, and 1.188 meq g−1, two-folder larger than those of the samples only treated by hydrothermal process. In summary, the fusion–hydrothermal method could facilitate the stabilization of heavy metal ions in the fly ash and the as-obtained solid product with high content of zeolite was promising for future applications.

Comparison of Cu/Zn/Pb Extraction from MSWI Fly Ash by Different Processes: Water Washing, Acid Washing and Water-Washing Combining Acid-Washing

Removal of Heavy Metals from Municipal Solid Waste Incineration (mswi) Fly Ash by Traditional and Microwave Acid Extraction

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Leaching Characteristics of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Assessment of heavy metals mobility and correlative recovery and decontamination from MSWI fly ash: Mechanism and hydrometallurgical process evaluation

A study on the chemical and mineralogical characterization of MSWI fly ash using a sequential extraction procedure

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Recovery of Zn and Cu from municipal solid waste incineration fly ash by integrating ammonium leaching and ammonia removal

Acid Controlled Washing of Municipal Solid Waste Incineration Fly Ash: Extraction of Calcium Inhibiting Heavy Metals and Reaction Kinetics.

LEACHING BEHAVIOR OF HEAVY METALS FROM MSWI FLY ASH

A Study on Chloride Extraction and Sintering Stabilization of MSWI Fly Ash

Removal of Heavy Metals from MSWI Fly Ash Using Acidithiobacillus Strains: Effects of Substrate Concentration

Chemical Speciation and Mobility of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Effect of Additive and Washing Pre-treatment on Heavy Metal Vaporization During Sintering Process of MSWI Fly Ash

Adsorption of Metal Ions in Wastewater on Fly Ash

SEM/EDS and XRD characterization of raw and washed MSWI fly ash sintered at different temperatures.

Mineralogical Characteristics of MSWI Fly Ash Stabilized by Chemical Reagents

Effects of Phosphoric Acid Washing on Thermal Stability and Chemical Stability of Heavy Metals of MSWI Fly Ash

Ph-Controlled Sulfuric Acid Washing Enhancing Heavy Metal Stabilization in Lightweight Aggregate Production from Municipal Solid Waste Incineration Fly Ash

Physicochemical and pozzolanic properties of municipal solid waste incineration fly ash with different pretreatments