Characteristics of flocs formed by polyaluminum chloride during flocculation after floc recycling and breakage
Wei Wei,Xin Li,Jia Zhu,Mao-an Du
DOI: https://doi.org/10.1080/19443994.2014.947329
IF: 1.1
2014-08-08
Desalination and Water Treatment
Abstract:The formation and the size distribution of the flocs were studied using a floc imaging system, and the relationship between breakage/regrowth of flocs from coagulation and flocculation with polyaluminum chloride and flocculation by floc recycling was investigated, from which it was found that both the processes exhibited similar performance in adsorption/charge neutralization zones; however, there were significant differences in restabilization and sweep coagulation zones. In adsorption/charge neutralization zones, the size distribution of flocs shifted toward flocs growth during the two processes. At the coagulant dosage of less than 0.010 mmol L−1, the residual turbidity and the particle number frequency of small flocs decreased, and both increased at the coagulant dosage of more than 0.010 mmol L−1. In restabilization and sweep coagulation zones, the floc size distribution shifted toward floc withering. Residual turbidity deterioration occurred after the breakage/regrowth of flocs, which was reduced significantly in the sweep coagulation zone than in restabilization zone. For floc recycling, the residual turbidity showed a decreasing trend, and the optimization effect was obtained at the coagulant dosage of more than 0.080 mmol L−1. Moreover, for the entire coagulation zone, the range of flocs distribution reduced during breakage/regrowth, while it expanded during floc recycling.
engineering, chemical,water resources