Experimental study of a single char particle combustion characteristics in a fluidized bed under O2/H2O condition
Lin Li,Lunbo Duan,Zhihao Yang,Shuai Tong,Edward John Anthony,Changsui Zhao
DOI: https://doi.org/10.1016/j.cej.2019.122942
IF: 15.1
2020-01-01
Chemical Engineering Journal
Abstract:Oxy-steam combustion is a potential new route for oxy-fuel combustion with carbon capture from coal-fired power plants. In the present work, the combustion behavior of single char particles were investigated in a transparent fluidized bed combustor under different operating conditions (i.e., gas atmosphere, oxygen concentration, coal rank, location, fluidization number, particle size, and bed temperature). Both pre-calibrated two-color pryrometry and a flexible thermocouple were used to measure the char particle temperature in the combustion tests. Results indicated that the pore structure of the char generated in H2O atmosphere was better than that generated in CO2 and N-2 atmospheres. As expected, with increase of oxygen concentration, the burnout time (t(b)) decreased, and the particle temperature (T-P) increased. The sequence of burnout times for different rank coal char particles was: anthracite > bituminous coal > lignite. Interestingly, comparing O-2/CO2 and O-2/N-2 combustion, a shorter t(b) and a lower T-P of char could be achieved simultaneously in O-2/H2O combustion, regardless of location and oxygen concentration. Furthermore, the increase of fluidization number strengthened the mass and heat transfer between the char and the environment, thereby reducing the tb and T-P of char. With increasing of particle size, the T-P slightly decreased, the tb increased markedly, and the gasification reactions became more and more significant. As the bed temperature increased, the gasification rate increased exponentially, and the mass transfer coefficient increased gradually.