Abstract:As the core component of the wind turbine generation gearbox, the gear-rotor-bearing transmission system typically operates in harsh environments, inevitably leading to the occurrence of composite faults in the system, which exacerbates system vibration. Therefore, it is necessary to study the vibration characteristics of wind turbine helical gear-rotor-bearing transmission systems with composite faults. This paper uses an improved energy method to calculate the theoretical time-varying mesh stiffness of a helical gear with a root crack failure. On the premise of considering the time-varying meshing stiffness of the faulty helical gear, the gear eccentric fault, and the nonlinear support force of the faulty bearing, a multi-degree-of-freedom helical gear-rotor-bearing transmission system with compound faults was established by using the lumped parameter method. The dynamic model of the system was solved based on the Runge–Kutta method, and the vibration response of the system under healthy conditions, single faults with gear eccentricity, single faults with tooth root cracks, and coupled bearing composite faults were simulated and analyzed. The results show that the simulation results based on KISSsoft software 2018 version verify the effectiveness of the improved energy method; the existence of single faults and composite faults will cause the fault characteristics in the time domain and frequency domain responses. In this paper, the influence of a single fault and a complex fault on the time domain and frequency domain of the system is mainly discovered through the fault study of the helical rotor-bearing system, and the influence of the fault degree on the vibration of the gear motion system is discussed. The greater the degree of the fault, the more vibration of the system occurs; accordingly, when the system is under the coupling of tooth root crack and bearing fault, there is a significant difference compared with the healthy system and the single fault system. The system vibration has obvious time domain and frequency domain signal characteristics, including periodic pulse impacts caused by gear faults and time domain impact caused by bearing. The fault characteristic frequencies can also be found in the frequency domain. In this paper, the fault study of a helical gear of wind turbine generation provides a reference for the theoretical analysis of the vibration characteristics of the helical gear-rotor-bearing system under various fault conditions, lays a solid foundation for the simulation and subsequent diagnosis of the composite fault signal of the system, and provides help for the fault diagnosis of wind turbine gearboxes in the future.

Theoretical and experimental study on wind wheel unbalance for a wind turbine

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

Condition Monitoring for Roller Bearings of Wind Turbines Based on Health Evaluation under Variable Operating States

Fault Analysis of Wind Turbines in China

Method Study on Reliability Improvement of Wind Turbine

Test system of a small wind turbine under laboratory conditions

Design of Dynamic Simulation of Wind Turbine

Rotor imbalance detection and quantification in wind turbines via vibration analysis

Experimental study on controlling actively wheel unbalance vibration

Fault Warning and Reliability Analysis of Wind Turbine Failure Based on Data-driven

MODEL ANALYSIS AND TEST RESEARCH OF HORIZONTAL-AXIAL MARINE CURRENT TURBINE

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Study on the Vibration Characteristics of the Helical Gear-Rotor-Bearing Coupling System of a Wind Turbine with Composite Faults

Application of the Ensemble Empirical Mode Decomposition and Hilbert Transform to Pedestal Looseness Study of Direct-Drive Wind Turbine

Experimental investigation and analysis for gearbox fault

Research on Fault Mechanism of Icing of Wind Turbine Blades

A Numerical Method for the Dynamics Analysis of Blade Fracture Faults in Wind Turbines Using Geometrically Exact Beam Theory and Its Validation

Fleetwide data-enabled reliability improvement of wind turbines

A Novel Wind Turbine Rolling Element Bearing Fault Diagnosis Method Based on CEEMDAN and Improved TFR Demodulation Analysis

Study on modeling and simulation of non-grid-connected wind turbine

Coupling Effect on Unbalanced Voltages and Power Under Faulty Condition in Triple Three-Phase Wind Power Generators