Abstract:The quasi-static crushing behavior of aluminum honeycomb materials is thoroughly evaluated using a combined experimental, analytical, and numerical approach. Based on experimental characterization, the constitutive properties of the honeycomb cores under flat-wise compression are approximated by an elastic perfectly plastic material with inclusion of hardening after densification. Two different cell size materials are tested and compared, and the effect of strain rate on the crushing stress is studied. The experimental results show that the crushing platen stress is directly related to the relative density of core materials, and it can be associated with the strain rate, even though the effect of strain rates is not so dominant based on the conducted quasi-static tests. A simple physical model for predicting the crushing wave length and stress is proposed and compared with the experimental data and available formulas in the literature. It is observed that the crushing wave length is close to the cell size and related to the geometric dimension and strain rate. The folding mechanism is also measured by the ARAMIS system (a photogrammetry technique), and the measured von Mises strains are compared with the numerical results from LS-DYNA, demonstrating that the folding mechanism is initiated by two plastic hinge lines formed at the cell corners. Multilayer effect is also investigated, and it indicates that including the second layer slightly decreases the maximal crushing stress, but the simple superposition is still applicable for crushing multilayer honeycomb cores with different density. Partial crushing due to small size cylindrical indenter is further studied, and the experiment shows that the partial crushing process can be described by an elastic—plastic hardening material. Side impact process of honeycomb materials is also investigated, and the collapse band and its propagation process are captured. The thorough characterization of core crushing behavior conducted in this study provides better understanding of the failure process of honeycomb materials and can be further employed to study energy absorption and impact response of sandwich structures.

Numerical and Experimental Investigation for Assessing the High Strain Rate Response of Nickel Based Multi-Layered Honeycomb Sandwiches

Dynamic Compressive Properties Of Nickel-Based Honeycomb Sandwich And Two-Layered Sandwich

An Examination of the Low Strain Rate Sensitivity of Additively Manufactured Polymer, Composite and Metallic Honeycomb Structures

Strain Rate Effect on the Out-of-plane Dynamic Compressive Behavior of Metallic Honeycombs: Experiment and Theory

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials

Experimental and Numerical Investigation of Static and Fatigue Behaviors of Composites Honeycomb Sandwich Structure

Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

Strain-rate effect on initial crush stress of irregular honeycomb under dynamic loading and its deformation mechanism

A Numerical Study on the Rate Sensitivity of Cellular Metals

Mechanical responses of a composite sandwich structure with Nomex honeycomb core

Numerical Study of Low-Velocity Impact Response of a Fiber Composite Honeycomb Sandwich Structure

Damage sensitivity studies of composite honeycomb sandwich structures under in-plane compression and 4-point bending: experiments and numerical simulations

Impact Dynamic Behavior and Deformation Mode of a Lightweight-Coated Honeycomb Steel Structure

The Effect of Loading Rate on the Compression Properties of Carbon Fibre-Reinforced Epoxy Honeycomb Structures

Experimental and Numerical Study on the Mechanical Response of Nomex Honeycomb Core under Transverse Loading

Quasi-Static Indentation Behavior of Honeycomb Sandwich Materials and Its Application in Impact Simulations

Influences Of Inertia And Material Property On The Dynamic Behavior Of Cellular Metals

The study of honeycomb material dynamic mechanical properties which under out-plane impact load

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Experimental and Numerical Studies on Aluminum Honeycomb with Various Cell Specifications under Impact Loading

Experimental and numerical investigation of impact behavior in honeycomb sandwich composites