Abstract:Mechanical properties of glassy materials exhibit drastic changes in the supercooled liquid region (SLR). In the current research, mechanical properties in several typical bulk metallic glasses (Pd42.5Ni7.5Cu30P20, Zr56Co28Al16 and Zr58Nb3Cu16Ni13Al10) were measured using both dynamic mechanical analysis and thermo-mechanical analysis. The modifications of elastic modulus (determined by dynamic mechanical analysis) and viscosity (determined by thermo-mechanical analysis) are strongly connected. The experimental findings suggest that the elastic modulus of the bulk metallic glasses evaluated by dynamic mechanical analysis correlates with the length variations determined by thermo-mechanical analysis facilities. Evidences from the experiments demonstrate that the modifications are very important in the bulk metallic glass with a large supercooled region and a large fragility, (Pd42.5Ni7.5Cu30P20), very limited in the bulk metallic glass with a limited supercooled region and a small fragility (Zr56Co28Al16), intermediate in the third case (Zr58Nb3Cu16Ni13Al10). The onset of crystallization corresponds to the end of the deformation of the sample and to the onset of the hardness increase. Therefore, these two different techniques (dynamic mechanical analysis and thermo-mechanical analysis) can provide useful and insightful information on the process ability of these amorphous materials. (C) 2015 Elsevier B.V. All rights reserved.

The Correlation Between Shear Elastic Modulus and Glass Transition Temperature of Bulk Metallic Glasses

Correlation Between Average Melting Temperature and Glass Transition Temperature in Metallic Glasses

Relationship Between the Shear Moduli of Metallic Glasses and Their Crystalline Counterparts

Link Between Shear Modulus and Enthalpy Changes of Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 High Entropy Bulk Metallic Glass

Correlation between glass transition temperature and melting temperature in metallic glasses

Lindemann-like Rule Between Average Thermal Expansion Coefficient and Glass Transition Temperature for Metallic Glasses

Relationship Between the Entropy of Mixing, Excess Entropy and the Shear Viscosity of Metallic Glasses Near the Glass Transition

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Insight on the Process Ability of Bulk Metallic Glasses by Thermo-Mechanical Analysis and Dynamic Mechanical Analysis

Elastic Properties of Ca-based Bulk Metallic Glasses Studied by Resonant Ultrasound Spectroscopy

Correlation Between High Temperature Deformation and Β Relaxation in LaCeBased Metallic Glass.

Dynamics of the strong metallic glass Zn38Mg12Ca32Yb18

Thermophysical and Mechanical Properties of Multicomponent Zr37Hf16Ni12.5Cu12.5Al11Co6Nb5 Bulk Glass-Forming Alloy

Yield Strength and Yield Strain of Metallic Glasses and Their Correlations with Glass Transition Temperature

Signature of properties in elastic constants of no-metalloid bulk metallic glasses

Correlation of Glass-Forming Ability to Thermal Properties in Ti-Based Bulk Metallic Glasses

Relationship between thermal expansion coefficient and glass transition temperature in metallic glasses

Evaluation of dynamic behaviors of metallic glass-forming liquids by elastic constants

Calculation of the Temperature Dependence of the Unrelaxed Shear Modulus of High-Entropy Bulk Metallic Glasses from Calorimetric Data

Theoretical Prediction of Temperature Dependent Shear Modulus of Bulk Metallic Glasses

Elastic Modulus Change and Its Relation with Glass-Forming Ability and Plasticity in Bulk Metallic Glasses