Abstract:In this work, we developed and validated two novel imaging geometries of benchtop multi-pinhole X-ray fluorescence computed tomography (XFCT) systems with Geant4 Toolkit. One of the Monte Carlo (MC) models utilized a fan beam source to illuminate a single slice of the object, a detector and a multi-pinhole collimator to image each slice's X-ray fluorescence (XRF). The other model consisted of a cone-beam X-ray source (designed as a 5 mm wide fan beam to reduce simulation time) to scan the whole object, two detectors and two multi-pinhole collimators to image the emissions. The phantom used in the simulations included four sections, each with three cone-shaped gold nanoparticle (GNP) inserts (5 mm in height, 3 mm in diameter across the top) with center-to-center distances of 4 mm, 4.5 mm and 4.86 mm. The GNPs concentration was 0.1 wt. %, 0.3 wt. %, 0.5 wt. % and 0.7 wt. %, respectively. The diameter of the multi-pinhole collimator was 1 mm. Performance was evaluated for pinhole-detector-distance (PDD) of 5 cm, 3.5 cm and 2.5 cm, and the results for different object layers and for single pinhole and multi-pinhole (9 pinholes) imaging were compared. The data showed that results worsened with decreasing GNPs insert diameters and with decreasing PDD (object-pinhole-distance was fixed). The multi-pinhole configurations performed better than a single pinhole. The detection limit for the first multi-pinhole operation was 0.21 wt. %; the second was 0.24 wt. %. Detection limits for the single pinhole were 0.32 wt. % and 0.35 wt. %, respectively. The first MC model could acquire 2D slice images of the object without rotation and the second MC model could image the 3D object efficiently. These two novel multi-pinhole systems could potentially provide a bioimaging modality for nanomedical applications.

Implement X-ray Refraction Effect in Geant4 for Phase Contrast Imaging

Grating-Based X-Ray Phase Contrast Imaging With a Polycapillary Semilens

Single-shot Grating-Based X-ray Phase Contrast Imaging Via Generative Adversarial Network

Monte Carlo simulation of grating-based neutron phase contrast imaging at CPHS

A Simulation Method of Gamma-Ray Phase Contrast Imaging for Metal Samples

Optimization and Simulation of Phase Contrast Imaging

Phase-contrast Imaging Simulation Based on a Micro-CT System

Quantitative Evaluation Methods of In-Line X-Ray Phase Contrast Techniques

Monte Carlo Simulation for Polychromatic X-ray Fluorescence Computed Tomography with Sheet-Beam Geometry

Simulation on in-line Fresnel diffractive phase-contrast imaging with partially coherent hard X-ray

Improved Reverse Projection Method for Large Refraction Angle in Grating-Based X-Ray Phase Contrast Imaging

Theory and Method of X-Ray Grating Phase Contrast Imaging

X-ray Phase Contrast Computed Tomographic Elementary Experiments under Incoherent Conditions

Dual Phase Grating Based X-ray Differential Phase Contrast Imaging with Source Grating: Theory and Validation

Feasibility Simulation of 3D Benchtop Multi-Pinhole X-ray Fluorescence Computed Tomography with Two Novel Geometries

Geant4 Simulations Of A Wide-Angle X-Ray Focusing Telescope

Geant4-Based Monte Carlo Simulator for Fan-and Cone-Beam X-ray CT

Near-field X-Ray Phase Contrast Imaging and Phase Retrieval Algorithm

X-ray Phase Contrast Imaging Using a Micro-Focused Electron Source

A hybrid simulation method towards the gamma ray phase contrast imaging for metallic material

Parameter optimization for a grating-based phase contrast x-ray system