Abstract:In the micro-tube gas-assisted extrusion process, flow theories ignoring cross-scale viscoelastic variations fail to effectively characterize the rheological state of the melt. To investigate the impact of cross-scale viscoelastic variation on the quality of the micro-tube gas-assisted extrusion, a 3D multiphase flow extrusion model incorporating a double gas-assisted layer was developed. Subsequently, we modified the DCPP constitutive equations based on the cross-scale factor model. Both the traditional and gas-assisted extrusions were simulated under macroscale and cross-scale models using the Ansys Polyflow. Finally, using the established gas-assisted extrusion platform, extrusion experiments were conducted. The results indicate that, owing to the reduced melt viscosity under the cross-scale model, the deformation behavior of the melt is more pronounced than in the macroscale model. The cross-scale model's numerical results more closely match the experimental outcomes under the same parameters, thereby confirming the feasibility of the theoretical analysis and numerical simulation. Moreover, the predictive capability of the cross-scale model for the micro-tube gas-assisted extrusion is further validated through numerical and experimental analyses with varying parameters. It is demonstrated that the cross-scale viscoelastic variation is a critical factor that cannot be overlooked in the gas-assisted extrusion.

The Finite Element Simulation and Analysis of Polymer Tube Coextrusion Process

Numerical simulation of filling flow of polymer melt in injection molding

Simulation and Analysis of UOE Pipe Production Processing by Three-Dimensional Finite Element Method

The polymer melt swelling behavior in micro-extrusion process for preparation of continuous carbon fiber reinforced PP prepreg filament

Three dimensional simulation of viscoelastic polymer melts flow in a cast film process

Analysis and experimental studies of polymer coextrusion flow

Numerical Simulation for Continuous Extrusion Process of the Flat Multi-Hole Aluminum Tubes

3-D Simulation on the Melt Interface in Co-extrusion Die

Numerical simulation of joint shell extrusion process by using 3-D finite element method

FEM and FVM Compound Numerical Simulation of Aluminum Extrusion Processes

Numerical modelling of the viscoelastic polymer melt flow in material extrusion additive manufacturing

Computer Simulation of Extrusion Process of Intermeshing Co-Rotating Twin Screw Extruders

3D Rigid–plastic FEM Numerical Simulation on Tube Spinning

Coupled thermal-force finite element analysis for a twin-screw extruder barrel with two heating pipelines in the axial direction

Study on the Melt Rheological Characterization of Micro-Tube Gas-Assisted Extrusion Based on the Cross-Scale Viscoelastic Model

Numerical Simulation and Analysis of the Effect of Some Materials and Processing Parameters on the Gas Assisted Extrusion of Ultra-high Molecular Weight Polyethylene

Progress in Numerical Simulation of Reactive Extrusion

Three-Dimensional Simulation of the Non-Isothermal Cast Film Process of Polymer Melts

3-D rigid plastic FEM simulation of extruding-bulging process of tee tubes

Tubing Extrusion of a Fluoropolymer Melt

Analysis of Sheet Metal Extrusion Process Using Finite Element Method