Numerical Simulation on Interaction of Fire Plume with Sprinkler Spray
Si-cheng LI,Hao-bo WANG,Ran HUO,Long-hua HU
DOI: https://doi.org/10.3969/j.issn.1009-6094.2007.03.030
2007-01-01
Applied Mechanics and Materials
Abstract:The paper is concerned about a numerical simulation formulated by its authors aiming to disclose the interactive process of the sprinkling water droplets with the fire plume induced by a wood crib fire in a cabin. For the research purpose, we have done an investigation over the effects of the sprinkling spray on the HRR of the fire and the temperature field under different discharge pressures. The results of our investigation have disclosed that the bigger the pressure of the sprinkling water droplets, the greater the penetration capacity would be generated for the droplets, and in turn the quicker the heat releasing rate decreases. Therefore, the sprinkler droplets won't be able to penetrate the plume to reach the fire source before the pressure reaches 0.2 MPa and therefore there would be little influence on the HRR under the pressure of 0.05 MPa and 0.1 MPa. The reason for this is that there exists a critical transitional point for the vertical temperature distribution at the fire plume axis. Beyond the point, the sprinkler inertial force would be dispersing and the temperature would decrease with the height increase, while, below the point, the fire plume buoyancy would be prevailing with the temperature increased and the height increased. As for the vertical temperature distribution around the fire plume, there also exists a transitional point. Below the point, the temperature would change little in a vertical direction, while, above that point, the temperature would rise with the increase of the height.