Abstract:The insulation condition is the key to determining whether gas insulated switchgears (GISs) can operate stably and reliably. Partial discharge (PD) detection is an important technique for condition monitoring and evaluation in GIS. Acoustic emission (AE) method is commonly used in on-site PD detection. However, in field applications, there are often problems such as low signal-to-noise ratio (SNR) of measured ultrasonic signals and difficulty in extracting PD pulses. To solve this problem, a denoising method for GIS ultrasonic signals based on the combination of ultrasonic and ultra-high frequency (UHF) signals is proposed in this paper. Based on the difference in correlation between noise and PD signals, the noise in measured signal can be suppressed through accumulating and averaging of multiple ultrasonic signals, and the SNR of PD signal can be significantly improved. An actual 500-kV GIS experiment platform is established, and PD measurements for different types of defects are conducted. Then, a comparative study is conducted on the denoising performance of the proposed method and traditional denoising methods such as wavelet method and singular value decomposition (SVD) method. The results indicate that compared to traditional methods, the method proposed in this paper has a higher reduction in noise level. Especially for extremely low-SNR signals (PD pulses buried in noise), traditional methods have poor performance, while the proposed method can still extract the PD pulse form the noise. Furthermore, based on the denoised ultrasonic signals, the defect localization analysis is conducted to demonstrates the correctness of the denoising results. Finally, the proposed method is applied to on-site PD detection, which further evaluates the effectiveness of the denoising method.

Study on White Noise Suppression for Pd Signals Using Ica

Pulse Extraction for Partial Discharge with Double Channels with Independent Component Analysis

Study of Noise Removal Technique Based on Independent Component Analysis

Preliminary Study on Signal Extraction Technology for PD Pulse Based on Independent Component Analysis

A New Approach to Extract PD Pulse Using Independent Component Analysis

Analysis and Rejection of Noises from Partial Discharge (PD) On-Site Testing Environment

Suppression of partial discharge's discrete spectral interference based on spectrum estimation and wavelet packet transform

Application of spectrum estimation and wavelet packet transform in suppression of partial discharge's discrete spectral interference

Study on a Spatially Selective Noise Filtration Technique for Suppressing Noises in Partial Discharge On-Line Monitoring

Enhanced Noise Suppression in Partial Discharge Signals via SVD and VMD with Wavelet Thresholding

A Study on Noise Reduction of Gear Pumps of Wheel Loaders Based on the ICA Model

Novel Denoizing Method for Partial Discharge Signals Using Singular Value Decomposition and Spectral Subtraction

An Automatic Tool for Partial Discharge De-Noising via Short-Time Fourier Transform and Matrix Factorization

Research on Denoising in Acoustic Emission Signals Based on Independent Component Analysis

A New Speech Denoising Method Based on WPD-ICA Feature Extraction

STUDY OF SUPPRESSING INTERFERENCE IN PARTIAL DISCHARGE (PD) ON-LINE MONITORING FOR TRANSFORMERS

A Denoising Method for Partial Discharge Ultrasonic Signals in GIS Based on Ultra-High Frequency Signal Synchronization

Noise suppressing techniques used for on-line monitoring of partial discharge in large generators

A Novel Hybrid Approach for Partial Discharge Signal Detection Based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise and Approximate Entropy

Study on Extracting Partial Discharge Signals in Excessive Noisy Electromagnetic Environment

Narrowband Interference Suppression of Partial Discharge on Singular Spectrum Analysis