Abstract:Based on heat conduction theory,a finite element method is introduced to investigate the three-dimensional transient temperature fields in a moving plate irradiated by a laser beam.The laser beam is assumed to be with Gaussian distribution,and the plate is considered as infinite along the motion direction,while the width and the height are finite.Considering the thermal physical parameters depended on temperature,convection and radiation factors of the surfaces,and the motion of the plate,the temperature fields on the upper and bottom surfaces of the plate are obtained.The numerical results show that the quasi-steady state temperature fields are approached.Comparing the temperature fields obtained by before and after considering the factors described above,it shows that the temperature dependences of the thermal properties of the material have distinct influences on the temperature fields.In the conditions that the thermal conductivity and thermal capacity of the material are dependent of temperature,the results are presented for two cases:(1) when neglecting temperature dependence of the thermal capacity,the maximum temperature and the quasi-steady state temperature are both higher than those of considering the temperature dependence;(2) when neglecting temperature dependence of the thermal conductivity,the maximum temperature will decrease while the quasi-steady state temperature will be the same as that of considering the temperature dependence.In addition,with increasing the convective heat transfer coefficient at the upper surface,the maximum temperature and the quasi-steady state temperature will decrease,while the effect of radiative heat losses of the surface can be ignored.Meanwhile,changing the moving velocity not only affects the temperature fields,but also alters the maximum temperature and the time for reaching the quasi-steady state condition.Furthermore,with the radius of the laser source decreasing,the maximum temperature and quasi-steady state temperature will both increase,while the former change is more obvious.

Simulation of Transient Temperature Field of Large-Caliber Optical Lens

Application of Orthogonal Test in Numerical Simulation of Glass Lens Molding

Finite element modeling of light propagation in turbid media under illumination of a continuous-wave beam

A simulation imaging method for actual optical system and results analysis

Simulation of the Inhomogeneous Medium with a Self-Adapting Grid.

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Light Transmission in Thermal Stress-Induced Birefringent Medium

Thermal Analysis of Large Telescope Structure

Finite element analyses of temperature fields in moving solids irradiated by a laser source

Simulations of Temperature in Disk-Type Laser with Fluid–Solid Interaction

Simulation of stray radiation from optical window with temperature-dependent spectral properties

Numerical Simulation of Temperature Field in Multilayer Heterogeneity Lamination Laser Soldering

A semi-analytical solution of 3-D transient temperature field for a uniform plate subjected to Gaussian-distribution laser heat source

The Influence of Material Optical Properties on Temperature Distribution in an Automotive Lamp

Multi-source directional heat conduction method based on coordinate transformation

Numeric Simulation Of Convective Heat Transfer Across A Heated Cylinder By Lattice-Boltzmann Method

Theoretical Study of Transient Thermal Conduction and Temperature Distribution Generated by Pulsed Laser

Numerical simulation for non-linear thermal wave

Numerical simulation of electron thermal transport phenomenon

Vectorial Electric Field Monte Caro Simulations for Focused Laser Beams (800 Nm-2220 Nm) in A Biological Sample

MC Simulation of Radiative Heat Transfer Between Planar Semi-Infinite Media and Nano-Spheres with Near Field Effect