Abstract:Purpose The purpose of this study is to analysis the pitting corrosion on the mechanical behavior of E690 high-strength steel sandwich panel. The pitting corrosion depth and degree of pitting (DOP) damage were used to evaluate the mechanical behaviors such as peak load and specific energy absorption of E690 panel. Design/methodology/approach The mechanical behavior of quasi-static compression, low-speed impact and three-point bending of E690 panel after pitting corrosion was simulated by ABAQUS nonlinear finite element method. Findings The quasi-static compression and low-speed impact mechanical properties can be greatly reduced by the pitting corrosion of the panel core, the pitting corrosion of the outer panel shows no obvious effect. The mechanical properties decrease with the increase of the pitting corrosion depth and DOP, and the influence of DOP is greater than that of pitting corrosion depth. The DOP of outer panel has less effect on mechanical properties of three-point bending compared with that of the core. Therefore, the pitting corrosion in the core of panel should be strictly controlled to prevent adverse effects on the mechanical properties of the structure. Originality/value To make up for the deficiency of the research on the corrosion behavior of high-strength steel sandwich panel structure, this paper chose E690 high-strength steel panel as the research object, and nonlinear finite element method was adopted to simulate the influence of pitting corrosion coverage area and pitting depth on its mechanical property degradation. The quasi-static compression, low-speed impact and three-point bending mechanical properties of panel with various DOPs and pitting depths were systematic studied.

Mechanical and thermology analysis of micro-perforated sandwich panel

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Deformation and Perforation of Sandwich Panels with Aluminum-Foam Core at Elevated Temperatures

Finite Element Study on Mechanical Performances of Multi-Span Metal Faced Sandwich Panels under Temperature Actions

Mechanical behavior test and analysis of HEH sandwich external wall panel

Low-velocity Perforation Behavior of Composite Sandwich Panels with Aluminum Foam Core

Analysis of the thermal characteristics of metal plastic extruding poly-styrene sandwich panel

Experimental evaluation on compression-after-impact behavior of perforated sandwich panel comprised of foam core and glass fiber reinforced epoxy hybrid facesheets

Empirical formulae assessment of ultimate strength for perforated stiffened panels under longitudinal compression

Analysis of Buckling Failure Modes of Composite Sandwich Panels Filled with Aluminum Foam

Test, numerical investigation and design of perforated advanced high-strength steel I-shaped built-up compression members

Finite Element Analysis on Ultimate Strength of an Aluminum Alloy Sandwich Panel

Mechanical Behavior of Sandwich Panels with Hollow Al-Si Tubes Core Construction

Experimental Investigation of the Post-Fire Impact Resistance and Energy-Absorbing Characteristics of Polyethylene Cored Lightweight Metal Sandwich Panels

Finite element analysis of pitting corrosion on mechanical behavior of E690 steel panel

Low Velocity Impact Response Of Lightweight Metal Sandwich Panel With Corrugated Core

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Experiment and Finite Element Study on the Structural Behavior of Steel Sandwich Panels

Failure Analysis of Thickness Gradient Negative Poisson's Ratio Concave Honeycomb Sandwich Panels Under Local Impact

Modal characteristics of micro-perforated sandwich beams with square honeycomb-corrugation hybrid cores: A mixed experimental-numerical study

Sound absorption of micro-perforated sandwich panel with honeycomb-corrugation hybrid core at high temperatures